what condition is the thread on the output shaft!? sure the nuts arnt stipped/cross threading:/
pics of ya bits helps..
| auszookers.com http://auszookers.com/forum/ |
|
| Nut on back of transfer size??? http://auszookers.com/forum/viewtopic.php?f=5&t=26125 |
Page 1 of 1 |
| Author: | SierraEchoX-ray [ Sun Sep 25, 2011 12:58 am ] |
| Post subject: | Nut on back of transfer size??? |
Hey guys. My little project sierra is missing the nut that holds the handbrake drum onto the shaft from the rear of the transfer. Can anyone tell me the specs of that particular nut so i can source a new one? car is a SJ40 1 litre 4 speed. Thanks in advance! |
|
| Author: | Damo [ Sun Sep 25, 2011 1:38 am ] |
| Post subject: | Re: Nut on back of transfer size??? |
SierraEchoX-ray wrote: Hey guys. My little project sierra is missing the nut that holds the handbrake drum onto the shaft from the rear of the transfer.
Can anyone tell me the specs of that particular nut so i can source a new one? car is a SJ40 1 litre 4 speed. Thanks in advance! Whenever i've needed one of these I just use genuine. Got a spare transfer kicking around to donate one? |
|
| Author: | 303zuke [ Sun Sep 25, 2011 6:35 am ] |
| Post subject: | Re: Nut on back of transfer size??? |
Could try Genuine parts? Early transfer without light switch is P/N 09159-18003. Late transfer with light switch is P/N 29951-83050. |
|
| Author: | SierraEchoX-ray [ Sun Sep 25, 2011 10:25 am ] |
| Post subject: | Re: Nut on back of transfer size??? |
i am not too familiar with Sierras but there is a plug coming out of my transfer case (not connected to anything though) i am guessing it might have the late transfer with a light switch?? |
|
| Author: | 303zuke [ Sun Sep 25, 2011 3:30 pm ] |
| Post subject: | Re: Nut on back of transfer size??? |
When you put it in 4wd, does a "4wd" light come on either on the dash near the keys or in the instrument cluster? |
|
| Author: | SierraEchoX-ray [ Mon Sep 26, 2011 7:40 am ] |
| Post subject: | Re: Nut on back of transfer size??? |
Not sure. Hasn't got a battery in it at this moment. You would think that cause there is a plug coming out of the transfer it would be a transfer with a switch in it right?? |
|
| Author: | SierraEchoX-ray [ Tue Oct 11, 2011 6:07 am ] |
| Post subject: | Re: Nut on back of transfer size??? |
Alright so i discovered it is a transfer without the light switch. i ordered the correct part ...09159-18003 and the nut seems too small and will not even start on the thread. I have tried the one for the light switched transfer and it is too big, you cant tighten it without it slipping back some threads. Can anyone shed some light on what might be the problem? |
|
| Author: | foolsp33d [ Tue Oct 11, 2011 6:31 am ] |
| Post subject: | Re: Nut on back of transfer size??? |
what condition is the thread on the output shaft!? sure the nuts arnt stipped/cross threading:/ pics of ya bits helps..
|
|
| Author: | SierraEchoX-ray [ Tue Oct 11, 2011 6:45 am ] |
| Post subject: | Re: Nut on back of transfer size??? |
I am not showing you my nuts!!! haha. i will have a closer look tomorrow when there is more daylight and grab some pictures |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|