| auszookers.com http://auszookers.com/forum/ |
|
| Weber gurus advice needed http://auszookers.com/forum/viewtopic.php?f=5&t=26128 |
Page 1 of 1 |
| Author: | Jester [ Sun Sep 25, 2011 3:01 am ] |
| Post subject: | Weber gurus advice needed |
Ive just got my hands on a weber to replace the standard vit carby its a weber dgav5d 016732 its got a base plate that was supposed to work for a 4k corolla. but supposedly jetted to suit a 1.8 - 2l motor. I have the capabilites to rebuild it just wondering what jets etc i should get for it, before i bolt it all up. also there was some kind of breather mod or something? to minimise issues with angles wasnt there? Its going to be going on a g16a with a .5mm overbore, 4-1 extractors standard cam and everything else, fully rebuilt bit under 10k ago. also has anyone, made up an adaptor for say an efi vit airbox arrangement to allow for maybe a snorkle later instead of foam filter it currently has? thanks in advance. |
|
| Author: | gregwatkins75 [ Sun Sep 25, 2011 6:20 am ] |
| Post subject: | Re: Weber gurus advice needed |
found this a while ago webber snorkel kit REDLINE Thanks for your help yesterday.........Still searching for the NOISE today though..Distributor is not at fault either!! And good Penrite oil didnt fix it! |
|
| Author: | Jester [ Mon Sep 26, 2011 12:09 pm ] |
| Post subject: | Re: Weber gurus advice needed |
thanks that sounds like the goods, anyone on the jetting? skyman? you seemed to know a lot about it in another thread |
|
| Author: | JrZook [ Mon Sep 26, 2011 12:27 pm ] |
| Post subject: | Re: Weber gurus advice needed |
Jester wrote: thanks that sounds like the goods, anyone on the jetting? skyman? you seemed to know a lot about it in another thread
Mate have a read of that other thread. I posted some jet sizes that will get you around the ballpark setup. Dan |
|
| Author: | Jester [ Mon Sep 26, 2011 8:10 pm ] |
| Post subject: | Re: Weber gurus advice needed |
ah righto i wasnt sure how different these webers were, the old bloke at work is great with carbs but he doesnt really deal with with anything smaller then v8s by choice |
|
| Author: | sogone [ Mon Sep 26, 2011 8:13 pm ] |
| Post subject: | Re: Weber gurus advice needed |
:rolleyes: Read the weber thread on outlimits. Epicness from JrZook and Built4Thrashing. All your answer will be revealed. |
|
| Author: | 31zook [ Mon Sep 26, 2011 8:45 pm ] |
| Post subject: | Re: Weber gurus advice needed |
Search (on google) for sergeants webber mods, he does secret stuff to it and it's ment to then run on any angle.... |
|
| Author: | Jester [ Tue Sep 27, 2011 8:02 pm ] |
| Post subject: | Re: Weber gurus advice needed |
ive had quick search on outers and couldnt really see find it (will i need a log in to access it?) ive never been over there before when i have a bit more time ill look a bit more. thanks |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|