they get sluggish. but my standard carby still runs at high angles. best elimination is injection
| auszookers.com http://auszookers.com/forum/ |
|
| carbys and angles .. http://auszookers.com/forum/viewtopic.php?f=5&t=26408 |
Page 1 of 1 |
| Author: | also76 [ Tue Oct 04, 2011 8:21 am ] |
| Post subject: | carbys and angles .. |
havent taken my zook out yet, ity has a webber carb fitted. ive heard that carbys cut out when climbing angles, just wondering if this is right and what people do to eliminate it ? i was thinking a low pressure pump ? thanks guys |
|
| Author: | SierraDan [ Tue Oct 04, 2011 8:24 am ] |
| Post subject: | Re: carbys and angles .. |
they get sluggish. but my standard carby still runs at high angles. best elimination is injection
|
|
| Author: | Jackson [ Tue Oct 04, 2011 8:25 am ] |
| Post subject: | Re: carbys and angles .. |
This thread is all about webers on zooks http://www.outerlimits4x4.com/viewtopic.php?f=7&t=28919&hilit=weber |
|
| Author: | orangeshannon [ Tue Oct 04, 2011 9:13 am ] |
| Post subject: | Re: carbys and angles .. |
yeh i had the same problem on my vitara it accually stalled and wouldnt even want to start and when it did it didnt like to rev up and taking off was alot of fun :S |
|
| Author: | honks [ Tue Oct 04, 2011 9:50 am ] |
| Post subject: | Re: carbys and angles .. |
i have a empi (weber copy) carb on my sierra that i bought off ebay that they said have had the stalling problem fixed and it still stalled up hill, so i then put the carb on back to front (fuel bowl to fire wall) and it seems ok now, but it will probably stall down hills now but i think most people with the same set up have the exact same problems. |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|