Dan's moved his stock mirror forward. Looks like he's made up a little bracket for it.
| auszookers.com http://auszookers.com/forum/ |
|
| Sierra Side Mirrors (in door hinge) http://auszookers.com/forum/viewtopic.php?f=5&t=26412 |
Page 1 of 3 |
| Author: | alien [ Tue Oct 04, 2011 9:22 am ] |
| Post subject: | Sierra Side Mirrors (in door hinge) |
Has anyone made/bought/found a side mirror that picks up the door hinge screws??? i wanna make an effort to run doorless this summer (ie: persuade the bloody screws to come out) - but to do it legally i'll need the mirrors re-mounted. i figured the easiest way will be to just use some wing-nuts or something to attach new mirrors whenever the doors are off (2 bolts each side, would take no time at all). Thoughts? |
|
| Author: | pyrohamish [ Tue Oct 04, 2011 10:02 am ] |
| Post subject: | Re: Sierra Side Mirrors (in door hinge) |
I'm about to make some. Found some 4" round mirrors at Autobarn which just mount by 1 strut off the mirror toa single bolt hold and I am planning to make the bracket come off either the windscreen hinge bolts nutsert on just above |
|
| Author: | monley [ Tue Oct 04, 2011 10:20 am ] |
| Post subject: | Re: Sierra Side Mirrors (in door hinge) |
I think some hilux/land cruiser mirrors with some modded brackets would be the go.... |
|
| Author: | CairnsZook [ Tue Oct 04, 2011 10:49 am ] |
| Post subject: | Re: Sierra Side Mirrors (in door hinge) |
Dan's moved his stock mirror forward. Looks like he's made up a little bracket for it.
|
|
| Author: | christover1 [ Tue Oct 04, 2011 10:50 am ] |
| Post subject: | Re: Sierra Side Mirrors (in door hinge) |
early 1.0 side mirrors are very suitable to mount on the hinge. |
|
| Author: | Joe [ Tue Oct 04, 2011 10:53 am ] |
| Post subject: | Re: Sierra Side Mirrors (in door hinge) |
What about these? |
|
| Author: | BlueSuzy [ Tue Oct 04, 2011 11:29 am ] |
| Post subject: | Re: Sierra Side Mirrors (in door hinge) |
Cool idea. I might weld the mirror holes up while im at it. 
Would be weird with no doors though. |
|
| Author: | alien [ Tue Oct 04, 2011 12:02 pm ] |
| Post subject: | Re: Sierra Side Mirrors (in door hinge) |
i've got a snorkle which is in the way on drivers side, so i can't relocate the stock mirror. pyrohamish, do you have a pic of the ones you found? |
|
| Author: | CompTruck [ Tue Oct 04, 2011 12:03 pm ] |
| Post subject: | Re: Sierra Side Mirrors (in door hinge) |
allowed no doors in qld? |
|
| Author: | alien [ Tue Oct 04, 2011 12:11 pm ] |
| Post subject: | Re: Sierra Side Mirrors (in door hinge) |
its been discussed a ton and basically comes down to "i dare you to try"... |
|
| Author: | 607CHA [ Tue Oct 04, 2011 6:10 pm ] |
| Post subject: | Re: Sierra Side Mirrors (in door hinge) |
Is it legal to run door less in qld |
|
| Author: | fordem [ Tue Oct 04, 2011 6:19 pm ] |
| Post subject: | Re: Sierra Side Mirrors (in door hinge) |
I'm sure some one has the skills to create an Aussie version. http://www.lowrangeoffroad.com/index.php/door-less-mirror-brackets.html |
|
| Author: | Zuccinni [ Tue Oct 04, 2011 7:14 pm ] |
| Post subject: | Re: Sierra Side Mirrors (in door hinge) |
607CHA wrote: Is it legal to run door less in qld
Motorbikes don't have doors?! |
|
| Author: | tonyevans [ Tue Oct 04, 2011 8:39 pm ] |
| Post subject: | Re: Sierra Side Mirrors (in door hinge) |
But they are built without them |
|
| Author: | Zuccinni [ Tue Oct 04, 2011 8:51 pm ] |
| Post subject: | Re: Sierra Side Mirrors (in door hinge) |
What about a motorbike with a sidecar? Passenger side has a door but the driver's side dosen't. How irresponsible is that from the manufactures? |
|
| Author: | 2stroker [ Tue Oct 04, 2011 9:27 pm ] |
| Post subject: | Re: Sierra Side Mirrors (in door hinge) |
Buy an LJ............ Sorry I couldn't help myself, any excuse to post a pic of an LJ 
|
|
| Author: | royce [ Tue Oct 04, 2011 9:36 pm ] |
| Post subject: | Re: Sierra Side Mirrors (in door hinge) |
Stick to the subject or I lock and ban, there is enough threads about running no doors already, they go nowhere |
|
| Author: | 2stroker [ Wed Oct 05, 2011 1:22 am ] |
| Post subject: | Re: Sierra Side Mirrors (in door hinge) |
Yeah you guys, Royce must be talking to you, my pic has no doors and it has mirrors.............................and i appologised for posting it. Seriously though, those mounts in the links look very simple, I will go make a set now and post a pic later. |
|
| Author: | royce [ Wed Oct 05, 2011 1:28 am ] |
| Post subject: | Re: Sierra Side Mirrors (in door hinge) |
2stroker wrote: Yeah you guys, Royce must be talking to you, my pic has no doors and it has mirrors.............................and i appologised for posting it.
Seriously though, those mounts in the links look very simple, I will go make a set now and post a pic later. As long as what you were really trying to say was get some threaded base mirrors and mount them to the front of your guards, weren't you 
|
|
| Author: | 2stroker [ Wed Oct 05, 2011 2:37 am ] |
| Post subject: | Re: Sierra Side Mirrors (in door hinge) |
Yeah and get me some to cause I only have one and cant find a mate for it |
|
| Author: | pyrohamish [ Wed Oct 05, 2011 5:05 am ] |
| Post subject: | Re: Sierra Side Mirrors (in door hinge) |
thats my idea. need to be a little careful in the mounting so the door wont hit when you have doors on and they are opened |
|
| Author: | alien [ Wed Oct 05, 2011 5:13 am ] |
| Post subject: | Re: Sierra Side Mirrors (in door hinge) |
^^ thats cool, those the ones from autobarn? |
|
| Author: | pyrohamish [ Wed Oct 05, 2011 6:41 am ] |
| Post subject: | Re: Sierra Side Mirrors (in door hinge) |
Sure are I was looking round down at the local and spotted them, I've been after some mirrors for my build and these seem like they will suit perfectly. Simple design and one connection point are ideal. |
|
| Author: | alien [ Wed Oct 05, 2011 7:42 am ] |
| Post subject: | Re: Sierra Side Mirrors (in door hinge) |
hell yeah - i also like that theyre low profile. that is a ball joint on the back of the mirror too right? so it can be moved around? Now all i gotta work out is how to set up my audio - got 6" speakers in the doors that i'll want to have a disconnect plug on, then somehow re-fit some 4" speakers in the factory location to swap over to them when the doors are off so while i wont have as good sound, at least ill have some... hrm. |
|
| Author: | alien [ Wed Oct 05, 2011 8:03 am ] |
| Post subject: | Re: Sierra Side Mirrors (in door hinge) |
just been googling around, motorcycle wing mirrors look the goods - one screw to attach and theyre quite flexible: 
wonder how cheap a set like that is from a wrecker? =) |
|
| Author: | royce [ Wed Oct 05, 2011 9:01 am ] |
| Post subject: | Re: Sierra Side Mirrors (in door hinge) |
the factory speaker hole is 6" anyway bike mirrors are cheap on ebay |
|
| Author: | alien [ Wed Oct 05, 2011 9:05 am ] |
| Post subject: | Re: Sierra Side Mirrors (in door hinge) |
my concern with the factory speaker hole and throwing in a 6" speaker is that my foot is going to hit it all the time... my current speakers have a 20mm spacer off the door to be able to fit in? But i'll look into that, thanks. the reason i want to hunt some wreckers is i'll get to check them out in person and make sure they'll bend and sit right, hopefully theres one thats got the same thread as the door screws, that'd be a fluke, but brilliant. |
|
| Author: | Moph [ Wed Oct 05, 2011 1:24 pm ] |
| Post subject: | Re: Sierra Side Mirrors (in door hinge) |
alien wrote: my current speakers have a 20mm spacer off the door to be able to fit in?
You have deep cone speakers then. I have Jaycar 6.5" kevlar splits installed in the stock location and the woofer fits fine with no spacer. Never hit it with my foot yet. You can actually get slimline speakers that have really shallow baskets, but as I say, you won't be needing them. Just check the basket depth on whatever you do buy. |
|
| Author: | alien [ Wed Oct 05, 2011 9:33 pm ] |
| Post subject: | Re: Sierra Side Mirrors (in door hinge) |
ah, cool - tim what brand/wattage etc are yours?? i know when i chose my current ones i went 3-way aluminium cone, and i think 220w from memory - i paid about $200 for the 2 6"s because i wanted quality... they've been brilliant too - i've had them under water a few times and theyre still going strong about 6 years on. |
|
| Author: | Moph [ Thu Oct 06, 2011 3:50 am ] |
| Post subject: | Re: Sierra Side Mirrors (in door hinge) |
My Sierra speakers are Jaycar 6.5" Kevlar splits ... kevlar so they don't give a stuff about going under water. They were pretty much the best thing available for $150 at the time. Certainly not high-end audio, but good for what they were. Don't think you can get them any more though. For my work wagon, I had some Morel Tempo 6.5" coaxials installed running off a 4x50W Alpine head unit. They sound pretty darn good for the price (I paid $240 installed at Westside Car Audio - had them fitted when they were doing the alarm install). Have a look here for a review of the 6.5" split version of the Morels (same driver and tweeter, just not remote mounted). The very last paragraph at the bottom is their conclusion. Not sure how durable the tweeter is on coaxials though. A whole lot less so than the woofer, I'm thinking. Probably a good argument for going splits. |
|
| Page 1 of 3 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|