you'd be suprised how far a grinder and a welder can take you
| auszookers.com http://auszookers.com/forum/ |
|
| hilux box behind g16b http://auszookers.com/forum/viewtopic.php?f=5&t=27020 |
Page 1 of 1 |
| Author: | 89zook [ Sat Oct 22, 2011 10:00 am ] |
| Post subject: | hilux box behind g16b |
Is there any way to put a hilux gearbox behind a g16b as I would like to do this in a lwb. Sierra |
|
| Author: | Ruthless [ Sat Oct 22, 2011 10:01 am ] |
| Post subject: | Re: hilux box behind g16b |
you'd be suprised how far a grinder and a welder can take you
|
|
| Author: | Brett [ Sat Oct 22, 2011 11:08 am ] |
| Post subject: | Re: hilux box behind g16b |
Lowrange sells a adapter to do it. its about 400 |
|
| Author: | 2stroker [ Sat Oct 22, 2011 1:46 pm ] |
| Post subject: | Re: hilux box behind g16b |
Why?? |
|
| Author: | steak_knife [ Sat Oct 22, 2011 6:12 pm ] |
| Post subject: | Re: hilux box behind g16b |
2stroker wrote: Why??
Extra weight???? 
|
|
| Author: | SierraDan [ Sat Oct 22, 2011 6:20 pm ] |
| Post subject: | Re: hilux box behind g16b |
steak_knife wrote: 2stroker wrote: Why?? Extra weight???? Wouldn't a GQ box be a better option then? Stronger too to handle the power of the mighty G16B! 
|
|
| Author: | BlueSuzy [ Sat Oct 22, 2011 6:27 pm ] |
| Post subject: | Re: hilux box behind g16b |
Another option is G16b-Vitara gbox-adaptor-lux transfer |
|
| Author: | steak_knife [ Sat Oct 22, 2011 6:27 pm ] |
| Post subject: | Re: hilux box behind g16b |
SierraDan wrote: steak_knife wrote: 2stroker wrote: Why?? Extra weight???? Wouldn't a GQ box be a better option then? Stronger too to handle the power of the mighty G16B! Road-ranger.....
|
|
| Author: | SierraDan [ Sat Oct 22, 2011 6:31 pm ] |
| Post subject: | Re: hilux box behind g16b |
steak_knife wrote: SierraDan wrote: steak_knife wrote: 2stroker wrote: Why?? Extra weight???? Wouldn't a GQ box be a better option then? Stronger too to handle the power of the mighty G16B! Road-ranger..... It'd be like a twin transfer haha |
|
| Author: | steak_knife [ Sat Oct 22, 2011 6:32 pm ] |
| Post subject: | Re: hilux box behind g16b |
SierraDan wrote: steak_knife wrote: SierraDan wrote: steak_knife wrote: 2stroker wrote: Why?? Extra weight???? Wouldn't a GQ box be a better option then? Stronger too to handle the power of the mighty G16B! Road-ranger..... It'd be like a twin transfer haha Won't need diff gear's either, cause they will be on the ground... 
|
|
| Author: | 3cyl [ Sat Oct 22, 2011 6:56 pm ] |
| Post subject: | Re: hilux box behind g16b |
Lucky it's a LWB, might even be able to use SWB rear shaft! 
|
|
| Author: | Brett [ Sat Oct 22, 2011 8:24 pm ] |
| Post subject: | Re: hilux box behind g16b |
BlueS uzy wrote: Another option is G16b-Vitara gbox-adaptor-lux transfer
Where do you get them from? |
|
| Author: | SierraDan [ Sat Oct 22, 2011 9:35 pm ] |
| Post subject: | Re: hilux box behind g16b |
Brett wrote: BlueS uzy wrote: Another option is G16b-Vitara gbox-adaptor-lux transfer Where do you get them from? low range maybe? |
|
| Author: | 89zook [ Sat Oct 22, 2011 10:02 pm ] |
| Post subject: | Re: hilux box behind g16b |
i want to run a hilux transfer because i am putting hilux diff under it and the transfer would line up with the rear diff and has a better low range than a vit transfer and if i run a gear driven hilux transfer i can gear it down more with a kit for marks adapters. there is not that much difference in size i don't think and i am not to fussed about weight or i would have just used WT diffs that i have |
|
| Author: | Scrawny [ Sat Oct 22, 2011 10:08 pm ] |
| Post subject: | Re: hilux box behind g16b |
The Hilux box is a fair bit longer than the Vit box Are the Hilux transfer gear or chain driven? |
|
| Author: | 89zook [ Sat Oct 22, 2011 10:16 pm ] |
| Post subject: | Re: hilux box behind g16b |
older model are gear and new ones are chain |
|
| Author: | BlueSuzy [ Sat Oct 22, 2011 11:36 pm ] |
| Post subject: | Re: hilux box behind g16b |
You will have to run 4.88-5.12 in the diffs to get the high range okish. What size tyres? I liked the thought of where your going with this as i was looking into similar, But i didnt like the weight and the actual size of the box's. |
|
| Author: | want33s [ Sun Oct 23, 2011 12:21 am ] |
| Post subject: | Re: hilux box behind g16b |
My new build utilises a G16B bolted to a Vitara bellhousing, bolted to an SOS RingR adaptor, bolted to Hilux W56 gearbox, bolted to twin hilux transfers, one of which has reduction gears fitted. RingR is available from Lowrange. 
|
|
| Author: | 89zook [ Sun Oct 23, 2011 1:06 am ] |
| Post subject: | Re: hilux box behind g16b |
I will only be running 33-35 tyres. i want to set it up with coil overs and hydro bump stops. so i want to do more hi speed stuff than crawling. |
|
| Author: | 2stroker [ Sun Oct 23, 2011 1:42 am ] |
| Post subject: | Re: hilux box behind g16b |
If you are going down that path you might as well bolt in something with enough power to turn that combination otherwise crawling will be your only option. There are bellhousings available for "W" series box to "A" series and "S" series Toyota engines. |
|
| Author: | BlueSuzy [ Sun Oct 23, 2011 1:53 am ] |
| Post subject: | Re: hilux box behind g16b |
want33s wrote: My new build utilises a G16B bolted to a Vitara bellhousing, bolted to an SOS RingR adaptor, bolted to Hilux W56 gearbox, bolted to twin hilux transfers, one of which has reduction gears fitted.
RingR is available from Lowrange. Looks like you will be cutting that rear crossmember out
|
|
| Author: | want33s [ Sun Oct 23, 2011 1:58 am ] |
| Post subject: | Re: hilux box behind g16b |
BlueSuzy wrote: Looks like you will be cutting that rear crossmember out
Yep...  It goes this friday.
|
|
| Author: | steak_knife [ Sun Oct 23, 2011 8:43 am ] |
| Post subject: | Re: hilux box behind g16b |
want33s wrote: BlueSuzy wrote: Looks like you will be cutting that rear crossmember out Yep... It goes this friday.I was thinking "why?"
then i looked closer...
|
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|