| auszookers.com http://auszookers.com/forum/ |
|
| hubs http://auszookers.com/forum/viewtopic.php?f=5&t=27040 |
Page 1 of 3 |
| Author: | in2net [ Sun Oct 23, 2011 5:46 am ] |
| Post subject: | hubs |
Hey guys have been thinking, Im scared of braking stuff 4 wheel driving so iv decided to put 22's on the sierra. I have a set of 20's im going to use for now. Now my question is can i remove the hubs off the front of the car so i can fit the 20's should i disconnect the front tail shaft? And what do i replace the hubs with? Thanks for your helps guys i know use wont like my idea but i drive it every day and don't want to break stuff 4 wheel driving. |
|
| Author: | SierraDan [ Sun Oct 23, 2011 5:48 am ] |
| Post subject: | Re: hubs |
sorry what.. Cant you get 22's with the right hole in the middle? or just run stock size wheels? |
|
| Author: | in2net [ Sun Oct 23, 2011 5:50 am ] |
| Post subject: | Re: hubs |
Yeah i can but big money im just going to get them from the usa with a commo stud pattern cause i found stud converters. EDIT- I just really wanna know about the locking hubs can i just remove them or what do i have to do? |
|
| Author: | SierraDan [ Sun Oct 23, 2011 5:56 am ] |
| Post subject: | Re: hubs |
I had my front end apart the other day i cant recall there being an easy way for it to happen.. Why can't you use stock wheels and tyres? You wont break anything driving that to work and back. |
|
| Author: | Joe [ Sun Oct 23, 2011 5:58 am ] |
| Post subject: | Re: hubs |
you can take the locking hub off however the end of the axle might still poke out to far |
|
| Author: | in2net [ Sun Oct 23, 2011 6:00 am ] |
| Post subject: | Re: hubs |
I can but id like to add a bit of style to the sierra. |
|
| Author: | in2net [ Sun Oct 23, 2011 6:01 am ] |
| Post subject: | Re: hubs |
Joe wrote: you can take the locking hub off however the end of the axle might still poke out to far
Im gonna cry now lols. Can you just take the hubs off and drive? |
|
| Author: | BlueSuzy [ Sun Oct 23, 2011 6:03 am ] |
| Post subject: | Re: hubs |
Try Boostcruising.com You can get zook 5 stud, Try Fords f-100. 22"s on a sierra. Fail. |
|
| Author: | redsofty [ Sun Oct 23, 2011 6:03 am ] |
| Post subject: | Re: hubs |
BlueSuzy wrote: Try Boostcruising.com x2
You can get zook 5 stud, Try Fords f-100. 22"s on a sierra. Fail. |
|
| Author: | SierraDan [ Sun Oct 23, 2011 6:03 am ] |
| Post subject: | Re: hubs |
pull the centre, front shaft and axles out. chuck in an empty third member. and fill the housing with dirt/rubbish cos of the holes haha. Paint the stock rims black or chrome or something. Or buy a commodore. |
|
| Author: | atari4x4 [ Sun Oct 23, 2011 6:04 am ] |
| Post subject: | Re: hubs |
this is why coily's are gay. |
|
| Author: | royce [ Sun Oct 23, 2011 6:05 am ] |
| Post subject: | Re: hubs |
No you cant sorry to say it but if you are too scared to fix broken stuff then you dont have the skills to remove all the 4wd stuff, just go trade it in on a corolla or something your stud converter idea is also stupid and dangerous |
|
| Author: | SierraDan [ Sun Oct 23, 2011 6:05 am ] |
| Post subject: | Re: hubs |
BlueSuzy wrote: 22"s on a sierra. Fail.
Yeah, could easily fit 30" rims geez
|
|
| Author: | tobeszook [ Sun Oct 23, 2011 6:06 am ] |
| Post subject: | Re: hubs |
22s Gay very Gay |
|
| Author: | BlueSuzy [ Sun Oct 23, 2011 6:07 am ] |
| Post subject: | Re: hubs |
Import a lazy axle from the usa, Coil convert it and cut all your springs in half, Sell your transfer(goodluck) and run it 2wd only with a longer tailshaft from the gearbox to the diff. |
|
| Author: | in2net [ Sun Oct 23, 2011 6:08 am ] |
| Post subject: | Re: hubs |
Why would i buy a commo or a corolla when i drove a mercedes before the sierra bit of a fail there. So many haters why? |
|
| Author: | redsofty [ Sun Oct 23, 2011 6:09 am ] |
| Post subject: | Re: hubs |
buy an exel or something if you dont plan to 4wd |
|
| Author: | redsofty [ Sun Oct 23, 2011 6:10 am ] |
| Post subject: | Re: hubs |
isnt it sort of a 4wd forum ?? |
|
| Author: | SierraDan [ Sun Oct 23, 2011 6:10 am ] |
| Post subject: | Re: hubs |
redsofty wrote: isnt it sort of a 4wd forum ??
Nah wrong one mate. |
|
| Author: | royce [ Sun Oct 23, 2011 6:12 am ] |
| Post subject: | Re: hubs |
in2net wrote: Why would i buy a commo or a corolla when i drove a mercedes before the sierra bit of a fail there. So many haters why?
The only fail here is making a 4wd 2wd to fit some rims not designed to fit why take something that drives shit on road to begin with and make it worse? |
|
| Author: | BlueSuzy [ Sun Oct 23, 2011 6:13 am ] |
| Post subject: | Re: hubs |
You buy a 4wd to 4WD. Not buy a 4wd to only 2wd it because cos your scared. People will call you a soccer mum and if you get stuck on speedhumps in a 4wd, No one will snatch you. |
|
| Author: | in2net [ Sun Oct 23, 2011 6:13 am ] |
| Post subject: | Re: hubs |
Keyboard warriors just asked nicely for a little bit of help. EDIT: For The nice ones if i just removed the hubs and drove would the axels fall out or what would happen? |
|
| Author: | BlueSuzy [ Sun Oct 23, 2011 6:15 am ] |
| Post subject: | Re: hubs |
in2net wrote: Keyboard samurai's just asked nicely for a little bit of help.
We are helping. Your not geting the idea. This is a 4wd forum. Not useless bling forum. |
|
| Author: | in2net [ Sun Oct 23, 2011 6:17 am ] |
| Post subject: | Re: hubs |
Its a zok forum. |
|
| Author: | redsofty [ Sun Oct 23, 2011 6:18 am ] |
| Post subject: | Re: hubs |
australian suzuki 4x4 ??? |
|
| Author: | BlueSuzy [ Sun Oct 23, 2011 6:18 am ] |
| Post subject: | Re: hubs |
Your diff will fall out too. Its not worth doing. |
|
| Author: | royce [ Sun Oct 23, 2011 6:18 am ] |
| Post subject: | Re: hubs |
Righto here you go, I have every confidence in you not doing this remove wheel remove free wheeling hub remove circlip from cv stub remove rear part of free wheeling hub housing remove caliper remove rotor remove the stub axle remove CV and axle refit stub axle refit rotor refit claiper fabricate blanking plate where free wheeling hub was so bearing doesnt fill with dirt and fail drain oil from diff so it doesnt fill up swivel hubs you can leave the front shaft in so people dont get suss on your masculinity, but putting it in 4wd will eventually destroy the front diff that drives nothing anyway |
|
| Author: | BlueSuzy [ Sun Oct 23, 2011 6:20 am ] |
| Post subject: | Re: hubs |
Why not make it fwd only? |
|
| Author: | redsofty [ Sun Oct 23, 2011 6:20 am ] |
| Post subject: | Re: hubs |
now were talking |
|
| Author: | in2net [ Sun Oct 23, 2011 6:24 am ] |
| Post subject: | Re: hubs |
royce wrote: Righto here you go, I have every confidence in you not doing this
remove wheel remove free wheeling hub remove circlip from cv stub remove rear part of free wheeling hub housing remove caliper remove rotor remove the stub axle remove CV and axle refit stub axle refit rotor refit claiper fabricate blanking plate where free wheeling hub was so bearing doesnt fill with dirt and fail drain oil from diff so it doesnt fill up swivel hubs you can leave the front shaft in so people dont get suss on your masculinity, but putting it in 4wd will eventually destroy the front diff that drives nothing anyway Is that it? man i hope so Thanks heaps. i wont put it in 4wd. And is 250km to a tank normal for u guys or do i need to do a service and give the carby a good clean? |
|
| Page 1 of 3 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|