how does compression get past the valve guides
| auszookers.com http://auszookers.com/forum/ |
|
| PCV filter blocked with oil http://auszookers.com/forum/viewtopic.php?f=5&t=27329 |
Page 1 of 1 |
| Author: | calofmilang [ Wed Nov 02, 2011 4:18 am ] |
| Post subject: | PCV filter blocked with oil |
I'm puzzled as to why the PCV filter on the rocker cover keeps clogging with oil. when it gets fully clogged oil starts to get pushed out from under the oil cap. when I have cleaned out the filter, under load I can hear air rushing out the filter. Is this normal? I thought the PCV was to let air into the rocker cover? I've searched through here but haven't found anything dealing with this specific problem. any help would be much appreciated because I'm sick of cleaning out the filter every week or so |
|
| Author: | steak_knife [ Wed Nov 02, 2011 5:00 am ] |
| Post subject: | Re: PCV filter blocked with oil |
calofmilang wrote: I'm puzzled as to why the PCV filter on the rocker cover keeps clogging with oil. when it gets fully clogged oil starts to get pushed out from under the oil cap.
when I have cleaned out the filter, under load I can hear air rushing out the filter. Is this normal? I thought the PCV was to let air into the rocker cover? I've searched through here but haven't found anything dealing with this specific problem. any help would be much appreciated because I'm sick of cleaning out the filter every week or so Out... PCV, positive crank-case ventilation By the sound's of it you have excess blow by, so compression is either going past the ring's or valve guide's... |
|
| Author: | royce [ Wed Nov 02, 2011 5:12 am ] |
| Post subject: | Re: PCV filter blocked with oil |
how does compression get past the valve guides
|
|
| Author: | steak_knife [ Wed Nov 02, 2011 5:41 am ] |
| Post subject: | Re: PCV filter blocked with oil |
royce wrote: how does compression get past the valve guides
Fuck ya!!!!
Was trying to start a new interweb's bullshit story!!!!!! 
|
|
| Author: | MacDaddy [ Wed Nov 02, 2011 6:50 am ] |
| Post subject: | Re: PCV filter blocked with oil |
steak_knife wrote: royce wrote: how does compression get past the valve guides Fuck ya!!!! Was trying to start a new interweb's bullshit story!!!!!! 
|
|
| Author: | calofmilang [ Wed Nov 02, 2011 4:20 pm ] |
| Post subject: | Re: PCV filter blocked with oil |
cheers, I'm guessing the only solution is replacing the rings? or could I get lucky and only have to replace the valve guide gaskets 
|
|
| Author: | steak_knife [ Thu Nov 03, 2011 7:06 am ] |
| Post subject: | Re: PCV filter blocked with oil |
calofmilang wrote: cheers, I'm guessing the only solution is replacing the rings?
or could I get lucky and only have to replace the valve guide gaskets You can get a can of it... Unless your on your P's, it sound's like a good time for a 1.6... |
|
| Author: | ajsr [ Thu Nov 03, 2011 7:18 am ] |
| Post subject: | Re: PCV filter blocked with oil |
what about trying some high compression valve guides with double forged valve springs. I'd bet that would fix the blow by |
|
| Author: | Scrawny [ Thu Nov 03, 2011 7:23 am ] |
| Post subject: | Re: PCV filter blocked with oil |
How bout just changing the filter to a catch can? |
|
| Author: | tonyevans [ Thu Nov 03, 2011 7:29 pm ] |
| Post subject: | Re: PCV filter blocked with oil |
steak_knife wrote: royce wrote: how does compression get past the valve guides Fuck ya!!!! Was trying to start a new interweb's bullshit story!!!!!! What like the one about Julie and Bob Brown both kicking out their boyfriends and getting married in the Elvis chapel of love.
|
|
| Author: | calofmilang [ Fri Nov 04, 2011 2:36 am ] |
| Post subject: | Re: PCV filter blocked with oil |
the catch can seems like a handy short term solution to stop the oil going everywhere. Might try and dodgey one up over the weekend. |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|