auszookers.com • View topic

Board index » Talking About Stuff » Suzuki Talk

1 litre body ?

Page 1 of 1

[ 9 posts ]

Print view

Previous topic | Next topic

Author

Message

shay

Joined: Sat Apr 30, 2011 8:14 pm
Posts: 41
Location: pt wakefield s.a

Posted: Wed Oct 26, 2011 6:53 pm

will a 1 litre soft top complete body fit on a 1.3 rolling chasis

christover1

az supporter

Joined: Tue Jul 15, 2008 11:30 pm
Posts: 8203
Location: Melbourne
Vehicle: Pajero 91 NH 3.0 SWB

Posted: Wed Oct 26, 2011 7:18 pm

shay wrote:

will a 1 litre soft top complete body fit on a 1.3 rolling chasis

I fitted a 1.3 motor and gearbox to my 1.0litre zook.
The gearbox tunnel was very tight, with my 50mm body lift.
So a hammer or widening of tunnel, or even weld in a 1.3 tunnel
may be needed.

Electric wiring is different, so transfer of wiring loom may be needed.

I have been told the body mounts dont line up, so some fabbing could be needed.
But I have never measured it up.

Body is basically same shape as a 1.3 narrow track,
so it could be feasible.

_________________
VIC ZOOK CLUB
http://www.vic.suzuki4wd.com/forum/

shay

Joined: Sat Apr 30, 2011 8:14 pm
Posts: 41
Location: pt wakefield s.a

Posted: Wed Oct 26, 2011 7:28 pm

thanks mate ..ive got complete 1.3 chasis with 1.3 running gear no bodyand was just hoping the 1 litre shell might have been a bolt on,and used the 1 litre transfer case up the track when fitting bigger tyres. thanks again

christover1

az supporter

Joined: Tue Jul 15, 2008 11:30 pm
Posts: 8203
Location: Melbourne
Vehicle: Pajero 91 NH 3.0 SWB

Posted: Wed Oct 26, 2011 7:34 pm

shay wrote:

Sounds like it is worth a look into.
Especially if body is a cheapy.

I started looking into fitting a 1.3 body to my 1.0,
but cost was same as just buying a 1.3.

_________________
VIC ZOOK CLUB
http://www.vic.suzuki4wd.com/forum/

zooky08

az supporter

Joined: Fri Nov 27, 2009 10:30 pm
Posts: 3426
Location: imbil/gympie. qld
Vehicle: 03 Jimny

Posted: Wed Oct 26, 2011 10:15 pm

I measure my 1.3 nt chassis with a 1l body and the mount are completely different. Front clip might be the same but body mounts are different.

_________________
03 Jimny 30 km2s 75mm lift f&r locked winch

Fatzook

az supporter

Joined: Sat Oct 27, 2007 11:30 pm
Posts: 14977
Location: The Hills
Vehicle: Vitara, NGV

Posted: Wed Oct 26, 2011 10:16 pm

1L body mounts are different. With a little work you can get it to fit though.

EDIT: Just to add to this, as Chrisover said, the tunnel is much narrower. The shifter hole is in a different spot, there is no accomodation for a brake booster on the firewall, the bonnet will not clear the 1.3, and I think thats about it.

_________________
2013 GV
1998 SV420 ute

shay

Joined: Sat Apr 30, 2011 8:14 pm
Posts: 41
Location: pt wakefield s.a

Posted: Fri Nov 04, 2011 8:08 pm

thanks again fellas

2stroker

Joined: Sun Sep 07, 2008 11:30 pm
Posts: 2689
Location: North Brisbane

Posted: Fri Nov 04, 2011 8:52 pm

I also depends on the year, my 87 1 litre has same body mounting and same tunnel as a 1300

want33s

az supporter

Joined: Fri Nov 16, 2007 10:30 pm
Posts: 8134
Location: Sunshine Coast Qld

Posted: Fri Nov 04, 2011 11:50 pm

I've found that if the 1.0 body uses the cone type rubber mounts, it will fit a 1.3 chassis nicely.
The early 1.0 with flat rubbers will only line up with a few 1.3 mounts.

Page 1 of 1

[ 9 posts ]

Board index » Talking About Stuff » Suzuki Talk

Who is online

Users browsing this forum: No registered users and 722 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum