Try to get a socket that has teeth all the way to the edge..... Sounds funny
but some don't and will work well for the outside nut but will slip on the inside one.
| auszookers.com http://auszookers.com/forum/ |
|
| 91 suzuki sierra hub socket size? http://auszookers.com/forum/viewtopic.php?f=5&t=27433 |
Page 1 of 1 |
| Author: | shane1992 [ Sat Nov 05, 2011 7:44 am ] |
| Post subject: | 91 suzuki sierra hub socket size? |
what is the size socket needed for the big nut washer thing in the hubs when changing wheel bearings? 1991 suzuki Sierra |
|
| Author: | Rusho [ Sat Nov 05, 2011 7:46 am ] |
| Post subject: | Re: 91 suzuki sierra hub socket size? |
50mm I think |
|
| Author: | SierraDan [ Sat Nov 05, 2011 8:10 am ] |
| Post subject: | Re: 91 suzuki sierra hub socket size? |
Roger that. |
|
| Author: | want33s [ Sat Nov 05, 2011 8:15 am ] |
| Post subject: | Re: 91 suzuki sierra hub socket size? |
Try to get a socket that has teeth all the way to the edge..... Sounds funny but some don't and will work well for the outside nut but will slip on the inside one.
|
|
| Author: | shane1992 [ Sat Nov 05, 2011 8:15 am ] |
| Post subject: | Re: 91 suzuki sierra hub socket size? |
Thanks guys! Is that the same as a hilux one? I have a hilux one in the shed I think, But I got a feeling its 52mm |
|
| Author: | shane1992 [ Sat Nov 05, 2011 8:19 am ] |
| Post subject: | Re: 91 suzuki sierra hub socket size? |
want33s wrote: Try to get a socket that has teeth all the way to the edge..... Sounds funny
but some don't and will work well for the outside nut but will slip on the inside one.I understand man haha |
|
| Author: | want33s [ Sat Nov 05, 2011 8:19 am ] |
| Post subject: | Re: 91 suzuki sierra hub socket size? |
Sierra is 50mm.. Toyota is 52mm... |
|
| Author: | shane1992 [ Sat Nov 05, 2011 8:20 am ] |
| Post subject: | Re: 91 suzuki sierra hub socket size? |
wander if I can get away with the 52 
|
|
| Author: | ridzilla [ Sat Nov 05, 2011 8:24 am ] |
| Post subject: | Re: 91 suzuki sierra hub socket size? |
You talking about the nut thing with a tabs behind it? on the shaft... |
|
| Author: | Scrawny [ Sat Nov 05, 2011 8:25 am ] |
| Post subject: | Re: 91 suzuki sierra hub socket size? |
shane1992 wrote: wander if I can get away with the 52
You won't be able to tighten it enough |
|
| Author: | shane1992 [ Sat Nov 05, 2011 8:28 am ] |
| Post subject: | Re: 91 suzuki sierra hub socket size? |
Scrawn wrote: shane1992 wrote: wander if I can get away with the 52 You won't be able to tighten it enough Yeah i'll have to buy correct size before I strip it and then im fucked |
|
| Author: | ridzilla [ Sat Nov 05, 2011 8:38 am ] |
| Post subject: | Re: 91 suzuki sierra hub socket size? |
Use a Chisel |
|
| Author: | Rusho [ Sat Nov 05, 2011 8:41 am ] |
| Post subject: | Re: 91 suzuki sierra hub socket size? |
ridzilla wrote: Use a Chisel
How do you tension it up with a chisel 
|
|
| Author: | Rusho [ Sat Nov 05, 2011 8:43 am ] |
| Post subject: | Re: 91 suzuki sierra hub socket size? |
Where is a good place to buy one at a reasonable price?? |
|
| Author: | Fatzook [ Sat Nov 05, 2011 9:07 am ] |
| Post subject: | Re: 91 suzuki sierra hub socket size? |
shane1992 wrote: Scrawn wrote: shane1992 wrote: wander if I can get away with the 52 You won't be able to tighten it enough Yeah i'll have to buy correct size before I strip it and then im fucked I've been using a 52mm for years. Never had an issue. |
|
| Author: | shane1992 [ Sat Nov 05, 2011 9:14 am ] |
| Post subject: | Re: 91 suzuki sierra hub socket size? |
Fatzook wrote: shane1992 wrote: Scrawn wrote: shane1992 wrote: wander if I can get away with the 52 You won't be able to tighten it enough Yeah i'll have to buy correct size before I strip it and then im fucked I've been using a 52mm for years. Never had an issue. THANK YOU ! Now I have possibly saved time and money ! |
|
| Author: | Fatzook [ Sat Nov 05, 2011 9:23 am ] |
| Post subject: | Re: 91 suzuki sierra hub socket size? |
I have even used a 55,, pipr socket on them, and achieved the required torque settings as outlined in the sevice manual. Its not best practice by any means, but it works.... |
|
| Author: | shane1992 [ Sat Nov 05, 2011 9:24 am ] |
| Post subject: | Re: 91 suzuki sierra hub socket size? |
Good enough for me!! |
|
| Author: | abclarke [ Sat Nov 05, 2011 9:27 am ] |
| Post subject: | Re: 91 suzuki sierra hub socket size? |
Sounds dodgy, but to get me out of trouble once at work we used a bigger sized socket and just ran a small strip of steel around the nut. Still worked too 
|
|
| Author: | shep [ Sat Nov 05, 2011 9:33 am ] |
| Post subject: | Re: 91 suzuki sierra hub socket size? |
i bought a flash one from lowrange. http://www.lowrangeoffroad.com/index.ph ... ocket.html |
|
| Author: | jimbo_jones [ Sat Nov 05, 2011 11:52 am ] |
| Post subject: | Re: 91 suzuki sierra hub socket size? |
this one go's all the way in http://www.trailtough.com/index.php?pag ... &Itemid=53 |
|
| Author: | steak_knife [ Sat Nov 05, 2011 6:14 pm ] |
| Post subject: | Re: 91 suzuki sierra hub socket size? |
Rusho wrote: ridzilla wrote: Use a Chisel How do you tension it up with a chisel With a hammer & ninja skill past down for generation's...
|
|
| Author: | yelozuki [ Wed Nov 14, 2012 10:13 am ] |
| Post subject: | Re: 91 suzuki sierra hub socket size? |
I have used a 54mm socket before without problemos |
|
| Author: | gregt [ Fri Nov 16, 2012 7:26 pm ] |
| Post subject: | Re: 91 suzuki sierra hub socket size? |
you can order them in from repco |
|
| Author: | rob45x [ Fri Nov 16, 2012 8:37 pm ] |
| Post subject: | Re: 91 suzuki sierra hub socket size? |
ive used a 72mm socket before. Worked a treat |
|
| Author: | Fatzook [ Fri Nov 16, 2012 9:29 pm ] |
| Post subject: | Re: 91 suzuki sierra hub socket size? |
rob45x wrote: ive used a 72mm socket before. Worked a treat Can I borrow it to do mine? |
|
| Author: | rob45x [ Fri Nov 16, 2012 9:35 pm ] |
| Post subject: | Re: 91 suzuki sierra hub socket size? |
Fatzook wrote: rob45x wrote: ive used a 72mm socket before. Worked a treat Can I borrow it to do mine? What's wrong with your teeth ?? |
|
| Author: | Fatzook [ Fri Nov 16, 2012 9:37 pm ] |
| Post subject: | Re: 91 suzuki sierra hub socket size? |
rob45x wrote: Fatzook wrote: rob45x wrote: ive used a 72mm socket before. Worked a treat Can I borrow it to do mine? What's wrong with your teeth ?? Tartar build up. got to get that fixed one day 
|
|
| Author: | rob45x [ Sat Nov 17, 2012 6:02 am ] |
| Post subject: | Re: 91 suzuki sierra hub socket size? |
It's all that tartar sauce. Get off the shit |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|