| auszookers.com http://auszookers.com/forum/ |
|
| blowin smoke http://auszookers.com/forum/viewtopic.php?f=5&t=27455 |
Page 1 of 1 |
| Author: | redback [ Sun Nov 06, 2011 6:29 am ] |
| Post subject: | blowin smoke |
hi guys and gals just wunderin if my rings are gone or just burning to much fuel ?? as i change down to corner then accelorate through i seem to be blowin blueish smoke what could be causing this any takers cheers |
|
| Author: | youda [ Sun Nov 06, 2011 6:31 am ] |
| Post subject: | Re: blowin smoke |
possibly valve stem seals? does it blow smoke on initial startup? |
|
| Author: | SierraDan [ Sun Nov 06, 2011 6:35 am ] |
| Post subject: | Re: blowin smoke |
Going through oil? |
|
| Author: | redback [ Sun Nov 06, 2011 6:35 am ] |
| Post subject: | Re: blowin smoke |
hey youda only in mornin when cold |
|
| Author: | redback [ Sun Nov 06, 2011 6:37 am ] |
| Post subject: | Re: blowin smoke |
yea burning about 500ml every 1200 to 1500 ks |
|
| Author: | redback [ Sun Nov 06, 2011 6:39 am ] |
| Post subject: | Re: blowin smoke |
done about 40000 since rebuild |
|
| Author: | SierraDan [ Sun Nov 06, 2011 6:43 am ] |
| Post subject: | Re: blowin smoke |
In the morning when cold is most likely valve stem seals. I had the same thing ages ago. The longer you leave it the worse it'll get. |
|
| Author: | youda [ Sun Nov 06, 2011 7:41 am ] |
| Post subject: | Re: blowin smoke |
SierraDan wrote: In the morning when cold is most likely valve stem seals.
I had the same thing ages ago. The longer you leave it the worse it'll get. def sort it out sooner rather than later, a good (dodgy ass) mechanic can do them with out removing the head, most will take it off though. |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|