atari4x4 wrote:
Bruce wrote:
Are you sure ECB do a steel bar???
AFAIK they only do Ally bars.
AFAIK they only do Ally bars.
the bar on your old GV was sweet.
Yes it was but it was custom made. It was a mix of a TJM T15 and a T13 bar. One of a kind
| auszookers.com http://auszookers.com/forum/ |
|
| Bull bar for 1999 GV http://auszookers.com/forum/viewtopic.php?f=5&t=27468 |
Page 1 of 1 |
| Author: | mattr [ Sun Nov 06, 2011 10:02 pm ] |
| Post subject: | Bull bar for 1999 GV |
heya, looking at 99 GV that needs new bumper grill and bonnet. who makes a decent bull bar for them? any one do a crome grill or anything too?? cheers matt |
|
| Author: | Built4thrashing [ Sun Nov 06, 2011 10:28 pm ] |
| Post subject: | Re: Bull bar for 1999 GV |
ECB do alloy and steel winch bars for them but they are expensive. I think even TJM and ARB make something but not 100% sure. |
|
| Author: | mattr [ Sun Nov 06, 2011 10:36 pm ] |
| Post subject: | Re: Bull bar for 1999 GV |
cheers. Dank is hopefully going to look at green one online for me tomorrow evening. |
|
| Author: | Bruce [ Sun Nov 06, 2011 10:57 pm ] |
| Post subject: | Re: Bull bar for 1999 GV |
Are you sure ECB do a steel bar??? AFAIK they only do Ally bars. |
|
| Author: | atari4x4 [ Sun Nov 06, 2011 11:00 pm ] |
| Post subject: | Re: Bull bar for 1999 GV |
Bruce wrote: Are you sure ECB do a steel bar???
AFAIK they only do Ally bars. the bar on your old GV was sweet. |
|
| Author: | Bruce [ Sun Nov 06, 2011 11:12 pm ] |
| Post subject: | Re: Bull bar for 1999 GV |
atari4x4 wrote: Bruce wrote: Are you sure ECB do a steel bar??? AFAIK they only do Ally bars. the bar on your old GV was sweet. Yes it was but it was custom made. It was a mix of a TJM T15 and a T13 bar. One of a kind
|
|
| Author: | mrw82 [ Sun Nov 06, 2011 11:36 pm ] |
| Post subject: | Re: Bull bar for 1999 GV |
Bruce wrote: atari4x4 wrote: Bruce wrote: Are you sure ECB do a steel bar??? AFAIK they only do Ally bars. the bar on your old GV was sweet. Yes it was but it was custom made. It was a mix of a TJM T15 and a T13 bar. One of a kind don't forget the custom 'shaping' that you done to it too, it truly is one of a kind now!!! 
|
|
| Author: | Built4thrashing [ Mon Nov 07, 2011 3:35 am ] |
| Post subject: | Re: Bull bar for 1999 GV |
Bruce wrote: Are you sure ECB do a steel bar???
AFAIK they only do Ally bars. You are right....they do only make alloy bars.....But they paint them in hammertone paint that looks like steel but lighter |
|
| Author: | Built4thrashing [ Mon Nov 07, 2011 3:35 am ] |
| Post subject: | Re: Bull bar for 1999 GV |
Bruce wrote: Are you sure ECB do a steel bar???
AFAIK they only do Ally bars. You are right....they do only make alloy bars.....But they paint them in hammertone paint that looks like steel but lighter http://www.ecb.com.au/vehicle.php?Make= ... ARCH2.y=13 |
|
| Author: | mattr [ Mon Nov 07, 2011 3:42 am ] |
| Post subject: | Re: Bull bar for 1999 GV |
yeah got price today. about $1500 for alloy with hammertone thats del to SA |
|
| Author: | Fatzook [ Mon Nov 07, 2011 7:09 am ] |
| Post subject: | Re: Bull bar for 1999 GV |
I have an ECB bar here (used) to suit 99 GV. Has a couple small scuff marks, nothing crazy. It just needs the mounting brackets and indicator lights. PM me if you want to save heaps of money 
|
|
| Author: | Built4thrashing [ Mon Nov 07, 2011 7:31 am ] |
| Post subject: | Re: Bull bar for 1999 GV |
I asked at the melb 4x4 show and ECB will not sell the mounting hardwear seperate to the bars. Mounts will have to be custom made or know someone that works at ECB |
|
| Author: | Fatzook [ Mon Nov 07, 2011 7:36 am ] |
| Post subject: | Re: Bull bar for 1999 GV |
Built4thrashing wrote: I asked at the melb 4x4 show and ECB will not sell the mounting hardwear seperate to the bars. Mounts will have to be custom made or know someone that works at ECB
Well thats easy fixed
|
|
| Author: | joeblow [ Mon Nov 07, 2011 7:36 am ] |
| Post subject: | Re: Bull bar for 1999 GV |
GV bumper will be quoted in Jan/ Feb. |
|
| Author: | Chop [ Mon Nov 07, 2011 8:00 am ] |
| Post subject: | Re: Bull bar for 1999 GV |
joeblow wrote: GV bumper will be quoted in Jan/ Feb.
Damn i wish mine didnt have airbags 
|
|
| Author: | Joe [ Mon Nov 07, 2011 8:25 am ] |
| Post subject: | Re: Bull bar for 1999 GV |
joeblow wrote: GV bumper will be quoted in Jan/ Feb.
If it will work with airbags ill take one 
|
|
| Author: | thesupervisor [ Mon Nov 07, 2011 8:55 am ] |
| Post subject: | Re: Bull bar for 1999 GV |
joeblow wrote: GV bumper will be quoted in Jan/ Feb.
looks like ill be waiting untill then will you also do a rear one at the same time? |
|
| Author: | joeblow [ Mon Nov 07, 2011 9:13 am ] |
| Post subject: | Re: Bull bar for 1999 GV |
Will be airbag compatible.......but no rear stuff for now. |
|
| Author: | thesupervisor [ Mon Nov 07, 2011 9:28 am ] |
| Post subject: | Re: Bull bar for 1999 GV |
i dont need a air bag one so can i get one next week? 
|
|
| Author: | shabz [ Mon Nov 07, 2011 9:30 am ] |
| Post subject: | Re: Bull bar for 1999 GV |
Built4thrashing wrote: I asked at the melb 4x4 show and ECB will not sell the mounting hardwear seperate to the bars. Mounts will have to be custom made or know someone that works at ECB
I called ECB and they don't sell them directly to public - but through their dealers. I bought just the 'fit kit', which includes all brackets, bolts, and front tie down recovery thingy. All Vehicle Accessories in South Melbourne were happy to sell them to me. Bit pricey at about $300 from memory. |
|
| Author: | Chop [ Mon Nov 07, 2011 9:38 am ] |
| Post subject: | Re: Bull bar for 1999 GV |
joeblow wrote: Will be airbag compatible.......but no rear stuff for now.
Excellent news Joe! 
|
|
| Author: | Joe [ Mon Nov 07, 2011 10:16 am ] |
| Post subject: | Re: Bull bar for 1999 GV |
Chop wrote: joeblow wrote: Will be airbag compatible.......but no rear stuff for now. Excellent news Joe!  
|
|
| Author: | foonji [ Fri Dec 02, 2011 3:05 am ] |
| Post subject: | Re: Bull bar for 1999 GV |
I'm excited. |
|
| Author: | ninjamoses [ Fri Dec 02, 2011 3:11 am ] |
| Post subject: | Re: Bull bar for 1999 GV |
How on earth did I miss this post?! 
As mentioned in my PM Joe I'm definitely keen for one as soon as they are ready. |
|
| Author: | Chop [ Fri Dec 02, 2011 3:38 am ] |
| Post subject: | Re: Bull bar for 1999 GV |
ninjamoses wrote: How on earth did I miss this post?!
As mentioned in my PM Joe I'm definitely keen for one as soon as they are ready. Told ya
|
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|