auszookers.com
http://auszookers.com/forum/

valve stem seals?
http://auszookers.com/forum/viewtopic.php?f=5&t=27481
Page 1 of 1

Author:  Joshyboy26 [ Mon Nov 07, 2011 6:05 am ]
Post subject:  valve stem seals?

hey guys just wondering my 1.3 sierra blows a bit of smoke every now and then and i was wondering if its due for a rebuild or if i can get away with doing valve stem seals.
it puffs a big heap of smoke at the bottoms of big hills when 4bying and when you rev it above about 4 grand in neutral but when driving on the road it doesnt seem too bad it doesnt use a huge amount of oil but i dont like it smoking like it does haha.
also how hard are vlave stems to do can they be done without messing with the timing and head gasket and all that jazz or is it a major job? any help would be great

Author:  nato78 [ Mon Nov 07, 2011 7:00 am ]
Post subject:  Re: valve stem seals?

What colour is the smoke? If it's black it's more likely to be unburnt fuel, if it's more of a blue colour it will more likely be burning oil. Once you work out where your smoke is coming from, you will have a better idea of what might need fixing.

Author:  Joshyboy26 [ Mon Nov 07, 2011 7:14 am ]
Post subject:  Re: valve stem seals?

yh it is blue and you can smell it its oil but i really dont want to rebuild it haha

Author:  slowsierra [ Mon Nov 07, 2011 7:19 am ]
Post subject:  Re: valve stem seals?

i have the same thing happening but i have a baleno coil pack motor. on the road it seems fine but 4wding under load it blows blue smoke. i was thinking about changing the valve stem seals too.

Author:  Joshyboy26 [ Mon Nov 07, 2011 7:33 am ]
Post subject:  Re: valve stem seals?

yh i think its them. hopefully... haha

Author:  DMAC [ Mon Nov 07, 2011 11:19 pm ]
Post subject:  Re: valve stem seals?

:helloo:

Have a read might help out as to difficulty. My 15yr old did it. :wink:

http://www.auszookers.com/index.php?nam ... valve+stem

Author:  Joshyboy26 [ Tue Nov 08, 2011 12:38 am ]
Post subject:  Re: valve stem seals?

Yh ok thanks mate

Page 1 of 1 All times are UTC + 9:30 hours
Powered by phpBB® Forum Software © phpBB Group
https://www.phpbb.com/