auszookers.com
http://auszookers.com/forum/

Help needed
http://auszookers.com/forum/viewtopic.php?f=5&t=27525		 Page 1 of 1
Author:  055ETH [ Tue Nov 08, 2011 9:40 am ]
Post subject:  Help needed
Ok so i'm Jae and new to sierras and 4wding, i normally play with drift cars :) i have a 93 sierra and am trying to change the front wheel bearings, now i have nfi how to do it, i've pulled the hub off and removed the old busted one and now cannot for the life of me figure out how the new ones go in. i'm located in strathpine( northside of bris) if anybody can drop round and give me a hand i'll gladly buy a 6 pack of rum/bourbon or whatever..... car also needs a tune as the owner before me played with the timing.......so it runs rich and smells like death :(


need to get the bearings fixed before the weekend as i go away for work next week and then supposed to be going to double island on the 17-20th of this month...


any help would be greatly appriciated even a step by step guide or something



cheers Jae
Author:  Daves4wd [ Tue Nov 08, 2011 9:51 am ]
Post subject:  Re: Help needed
There's a thread on here about it I think I know there's one for a hub rebuild I can't find it at the moment
Author:  stockman [ Tue Nov 08, 2011 9:55 am ]
Post subject:  Re: Help needed
Daves4wd wrote:
There's a thread on here about it I think I know there's one for a hub rebuild I can't find it at the moment


:)

http://auszookers.com/index.php?name=Fo ... ic&t=20086
Author:  055ETH [ Tue Nov 08, 2011 10:04 am ]
Post subject:  Re: Help needed
Yeah that's hub rebuild. My hubs are fine it's the bearings that need doing not hubs :)
Author:  gypsy [ Tue Nov 08, 2011 10:13 am ]
Post subject:  Re: Help needed
im in strathpine where abouts are u in strathpine
Author:  055ETH [ Tue Nov 08, 2011 10:23 am ]
Post subject:  Re: Help needed
My backyard backs onto the paddock across the road from Westfield :)
Author:  gypsy [ Tue Nov 08, 2011 10:26 am ]
Post subject:  Re: Help needed
i can give u a hand im just up the road
Author:  stockman [ Tue Nov 08, 2011 10:33 am ]
Post subject:  Re: Help needed
055ETH wrote:
Yeah that's hub rebuild. My hubs are fine it's the bearings that need doing not hubs :)


these may help:

http://auszookers.com/index.php?name=Fo ... ic&t=24331


http://auszookers.com/index.php?name=Fo ... ic&t=13033
Author:  055ETH [ Tue Nov 08, 2011 10:46 am ]
Post subject:  Re: Help needed
Cheers gypsy are you free tomorrow afternoon at all?
Author:  gypsy [ Tue Nov 08, 2011 10:50 am ]
Post subject:  Re: Help needed
yeh i finish at 5 pm me your address and i will come round
Author:  055ETH [ Tue Nov 08, 2011 10:53 am ]
Post subject:  Re: Help needed
Thanks heaps man. What do I owe you
Author:  gypsy [ Tue Nov 08, 2011 11:11 am ]
Post subject:  Re: Help needed
nothen glad to help
Author:  zukmeista [ Tue Nov 08, 2011 4:37 pm ]
Post subject:  Re: Help needed
Armsup Yay for Auszookers! :goodjob:
Author:  DMAC [ Wed Nov 09, 2011 12:37 am ]
Post subject:  Re: Help needed
gypsy wrote:
nothen glad to help


Thats the way Auszookers roll. :wink:

Plenty of help close by I'm at Eatons Hill always happy to lend a hand too.
Author:  055ETH [ Wed Nov 09, 2011 2:08 am ]
Post subject:  Re: Help needed
Thanks heaps. It's still a bit of a pig at the moment :( but am slowly cleaning it up. Will be sure to let you boys know when we head out for some offside fun
Page 1 of 1 All times are UTC + 9:30 hours
Powered by phpBB® Forum Software © phpBB Group
https://www.phpbb.com/