| auszookers.com http://auszookers.com/forum/ |
|
| rear wheel bearings (suzuki sierra) http://auszookers.com/forum/viewtopic.php?f=5&t=27557 |
Page 1 of 1 |
| Author: | shane1992 [ Wed Nov 09, 2011 9:13 pm ] |
| Post subject: | rear wheel bearings (suzuki sierra) |
Hey guys, what should I expect when doing this? Are the bearings hard to get off? I have a bearing puller will that do the job? |
|
| Author: | sogone [ Wed Nov 09, 2011 9:18 pm ] |
| Post subject: | Re: rear wheel bearings (suzuki sierra) |
Ya need a press. Or a grinder and a hammer. I always just use a grinder then a cold chisel and hammer. |
|
| Author: | shane1992 [ Wed Nov 09, 2011 9:46 pm ] |
| Post subject: | Re: rear wheel bearings (suzuki sierra) |
What exactly do you grind, As much of the bearing as you can with out hitting the axle? |
|
| Author: | zukmeista [ Wed Nov 09, 2011 9:47 pm ] |
| Post subject: | Re: rear wheel bearings (suzuki sierra) |
You need to grind the bearing and the collar. They will probably get hot enough that they will just slide off anyway. |
|
| Author: | zooky08 [ Wed Nov 09, 2011 9:49 pm ] |
| Post subject: | Re: rear wheel bearings (suzuki sierra) |
Grind as much as u can then use a cold chisel nd hit inside the crack of the sleeve. Thee sleeve should eventually crack and slide off. Bearing is a bit harder as you can't really get ion there witth a grinder. Another hint make sure you put the backing plate on first before you press on the new bearings 
|
|
| Author: | shane1992 [ Wed Nov 09, 2011 9:53 pm ] |
| Post subject: | Re: rear wheel bearings (suzuki sierra) |
Are they hard to press back on? Thanks for the help! |
|
| Author: | royce [ Wed Nov 09, 2011 9:54 pm ] |
| Post subject: | Re: rear wheel bearings (suzuki sierra) |
http://auszookers.com/index.php?name=Ne ... cle&sid=17 |
|
| Author: | shane1992 [ Wed Nov 09, 2011 9:57 pm ] |
| Post subject: | Re: rear wheel bearings (suzuki sierra) |
royce wrote: http://auszookers.com/index.php?name=News&file=article&sid=17
i looked hard for a thread! Obviously didnt look hard enough 
|
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|