Thanks Royce to easy.
| auszookers.com http://auszookers.com/forum/ |
|
| Check Engine light ECU input/output http://auszookers.com/forum/viewtopic.php?f=5&t=27603 |
Page 1 of 1 |
| Author: | DMAC [ Fri Nov 11, 2011 7:21 am ] |
| Post subject: | Check Engine light ECU input/output |
Finally getting around to wiring the check engine light. How does the ECU (MK1 GTi) treat the engine light? Ie. 1. A clean set of contacts that switches to ground. or 2. Does it rely on a certian current flow. The reason for the question is I'm going to use a 12v LED indicator not a bulb, and was wondering if it will have an effect on its operation. |
|
| Author: | royce [ Fri Nov 11, 2011 7:33 am ] |
| Post subject: | Re: Check Engine light ECU input/output |
LED will be fine, its jsut switches the terminal in the ECU to ground |
|
| Author: | DMAC [ Fri Nov 11, 2011 7:35 am ] |
| Post subject: | Re: Check Engine light ECU input/output |
Thanks Royce to easy.
|
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|