auszookers.com
http://auszookers.com/forum/

g16b wiring colours, what did you come up with
http://auszookers.com/forum/viewtopic.php?f=5&t=27897		 Page 1 of 1
Author:  strop [ Mon Nov 21, 2011 8:20 am ]
Post subject:  g16b wiring colours, what did you come up with
hey everyone just about at the end of my conversion of a g16b into my sierra. However I didn't get the wiring to the cluster so from the diagram I had I couldn't quite work it out.

So could someone let me know what colors you come up with for the engine light, vss, tacho, I think that's all I'm after??
Author:  11_evl [ Mon Nov 21, 2011 8:31 am ]
Post subject:  Re: g16b wiring colours, what did you come up with
when i did mine it was all the same as the sierra colours..ie the temp oil press charge light. vss had to be added
Author:  strop [ Mon Nov 21, 2011 9:40 am ]
Post subject:  Re: g16b wiring colours, what did you come up with
Yes that's right but I'm really after vss colour and engine light
Author:  strop [ Mon Nov 21, 2011 10:15 pm ]
Post subject:  Re: g16b wiring colours, what did you come up with
Bump
Author:  Fatzook [ Mon Nov 21, 2011 10:42 pm ]
Post subject:  Re: g16b wiring colours, what did you come up with
VSS and check eng are usually Violet with yellow trace.
Author:  strop [ Tue Nov 22, 2011 2:34 am ]
Post subject:  Re: g16b wiring colours, what did you come up with
Do you know the tacho one also??
Author:  royce [ Tue Nov 22, 2011 3:03 am ]
Post subject:  Re: g16b wiring colours, what did you come up with
tacho is plain brown
Author:  strop [ Tue Nov 22, 2011 4:52 am ]
Post subject:  Re: g16b wiring colours, what did you come up with
Thought as much just double checking so I don't do any damage cheers guys
Author:  reeceh [ Tue Nov 22, 2011 7:56 am ]
Post subject:  Re: g16b wiring colours, what did you come up with
so ive got a plain brown wire in my loom where abouts do you hook it up to the tacho
Author:  strop [ Fri Jan 06, 2012 4:51 am ]
Post subject:  Re: g16b wiring colours, what did you come up with
im still pretty unclear as the what the vss is and the the check engine light??
Author:  strop [ Fri Jan 06, 2012 5:34 am ]
Post subject:  Re: g16b wiring colours, what did you come up with
whait i have found the vss and found how the check engine light is wired in, im mainly after a throttle position sensor number.... mine is rubbed off, if you have all the following can you post a picture of your code please, its really hard to order something new when you have no code all i keep getting in return is that there is a few to choose from :(

its a 96/97 model engine, mitsubishi computer, three pin MAF meter, 4 pin TPS, 7 pin (i think from memory) distributor this has coil all in one. please help me someone....
Author:  strop [ Fri Jan 06, 2012 8:13 pm ]
Post subject:  Re: g16b wiring colours, what did you come up with
Bump, anyone
Author:  steak_knife [ Fri Jan 06, 2012 8:45 pm ]
Post subject:  Re: g16b wiring colours, what did you come up with
strop wrote:
whait i have found the vss and found how the check engine light is wired in, im mainly after a throttle position sensor number.... mine is rubbed off, if you have all the following can you post a picture of your code please, its really hard to order something new when you have no code all i keep getting in return is that there is a few to choose from :(

its a 96/97 model engine, mitsubishi computer, three pin MAF meter, 4 pin TPS, 7 pin (i think from memory) distributor this has coil all in one. please help me someone....


because there is.......

I could give you the number of mine & it may not work with your ecu,
Author:  steak_knife [ Fri Jan 06, 2012 8:48 pm ]
Post subject:  Re: g16b wiring colours, what did you come up with
If you can get the VIN off the car the eng came out of, a Suzuki dealer "should" be able to help.
Author:  strop [ Fri Jan 06, 2012 9:14 pm ]
Post subject:  Re: g16b wiring colours, what did you come up with
Well its in my sierra, and I do realise that, so that's why I put all my info up so that someone with the same computer etc, please.
Author:  strop [ Fri Jan 06, 2012 9:15 pm ]
Post subject:  Re: g16b wiring colours, what did you come up with
It runs but not driveable at the moment :)
Author:  atari4x4 [ Fri Jan 06, 2012 10:03 pm ]
Post subject:  Re: g16b wiring colours, what did you come up with
post some decent clear pics of the TPS & someone might be able to pick which one it is.
Author:  reeceh [ Sat Jan 21, 2012 6:10 am ]
Post subject:  Re: g16b wiring colours, what did you come up with
Bit of a bump where abouts do u tap the brown tacho wire into from the g16b loom??
Author:  reeceh [ Sun Jan 22, 2012 5:04 am ]
Post subject:  Re: g16b wiring colours, what did you come up with
Anyone be able to point me in the right direction? I'm confused as to hook it into the cluster loom or behind the actual instrument!
Author:  strop [ Sun Jan 22, 2012 5:08 am ]
Post subject:  Re: g16b wiring colours, what did you come up with
The brown wire from the sierra loom isn't used and runs off the old motor to the instrument cluster and this gives you your tacho, but there is a brown wire in the vitara loom that does the same thing you simply have to cut the old wire to the cluster and join the vitara one.
Author:  reeceh [ Sun Jan 22, 2012 5:19 am ]
Post subject:  Re: g16b wiring colours, what did you come up with
Thankyou that's the answer I was looking for
Page 1 of 1 All times are UTC + 9:30 hours
Powered by phpBB® Forum Software © phpBB Group
https://www.phpbb.com/