auszookers.com :: View topic - Original Door Trim Design

the pattern on the stock ones is nice, just the vinyl used thats dated... mines not too bad cos its not some crazy rainbow or tan colour though.

if you're planning on making some, maybe do the vinyl trim over some acetate/pvc rather than wood which swells and rots etc? just a thought =)

Gets too hot in the sun. Cook ya bloody legs!

Even if you made up door cards with the carbon look fabrics. They would sell.

Id be umming and arring then, whether to get them or coily full plastic ones..

actually now you mention it, smooth corflute would work! its bloody cheap too...

it does tend to kink though, cos of the hollow bits - singwriters use a pvc stuff as well which can be had in 3mm thick and would be ideal, its UV rated and also not that expensive.

Hey Benchai, is this what you're after?

That door card on it's own i'm not using. You can have it if it's any use to you.

Author:	Benchai [ Wed Nov 30, 2011 10:36 am ]
Post subject:	Original Door Trim Design
Has anyone got an image of factory original door trims for Sierra? Looking to make some both original and with custom design to offer for sale. Cheers

Author:	alien [ Wed Nov 30, 2011 12:01 pm ]
Post subject:	Re: Original Door Trim Design
i can take some pics of min eif you get stuck... PM me if you want me to mate

Author:	BlueSuzy [ Wed Nov 30, 2011 12:08 pm ]
Post subject:	Re: Original Door Trim Design
It would be good to help him anyway...Because thats what he's asking for..

Author:	alien [ Wed Nov 30, 2011 12:11 pm ]
Post subject:	Re: Original Door Trim Design
yeah i just wont get to it till the weekend is all... so someone might come up with pics sooner.

Author:	BlueSuzy [ Wed Nov 30, 2011 12:26 pm ]
Post subject:	Re: Original Door Trim Design
Even if you made up door cards with the carbon look fabrics. They would sell. Id be umming and arring then, whether to get them or coily full plastic ones..

auszookers.com http://auszookers.com/forum/

Original Door Trim Design http://auszookers.com/forum/viewtopic.php?f=5&t=28180	Page 1 of 1

Author:	alien [ Wed Nov 30, 2011 12:32 pm ]
Post subject:	Re: Original Door Trim Design
the pattern on the stock ones is nice, just the vinyl used thats dated... mines not too bad cos its not some crazy rainbow or tan colour though. if you're planning on making some, maybe do the vinyl trim over some acetate/pvc rather than wood which swells and rots etc? just a thought =)

Author:	Damo [ Wed Nov 30, 2011 6:24 pm ]
Post subject:	Re: Original Door Trim Design
alien wrote: the pattern on the stock ones is nice, just the vinyl used thats dated... mines not too bad cos its not some crazy rainbow or tan colour though. if you're planning on making some, maybe do the vinyl trim over some acetate/pvc rather than wood which swells and rots etc? just a thought =) Aluminium is the go

Author:	sogone [ Wed Nov 30, 2011 7:59 pm ]
Post subject:	Re: Original Door Trim Design
Gets too hot in the sun. Cook ya bloody legs!

Author:	shep [ Wed Nov 30, 2011 8:04 pm ]
Post subject:	Re: Original Door Trim Design
sogone wrote: Gets too hot in the sun. Cook ya bloody legs! thats what aircon is for

Author:	sogone [ Wed Nov 30, 2011 8:20 pm ]
Post subject:	Re: Original Door Trim Design
I have a full aircon setup here still .

Author:	Damo [ Wed Nov 30, 2011 8:20 pm ]
Post subject:	Re: Original Door Trim Design
sogone wrote: Gets too hot in the sun. Cook ya bloody legs! aluminium as the backing instead of Masonite or whatever. then cover than in foam and whatever material. shouldn't be hot at all

Author:	sogone [ Wed Nov 30, 2011 8:36 pm ]
Post subject:	Re: Original Door Trim Design
I got ya. I thought you meant aluminum exposed with a cotton pattern for half of it.

Author:	Benchai [ Wed Nov 30, 2011 8:51 pm ]
Post subject:	Re: Original Door Trim Design
BlueSuzy wrote: Even if you made up door cards with the carbon look fabrics. They would sell. Id be umming and arring then, whether to get them or coily full plastic ones.. I use the carbon fibre a fair bit on my custom bike seats. I was putting together some designs in my head so I'm glad you mentioned it - could be on the right track. I hadn't thought of using plastic - cost will be a factor but it shouldn't increase the cost of a card too much. I forgot some of these things are on submarine duty

Author:	pyrohamish [ Wed Nov 30, 2011 9:16 pm ]
Post subject:	Re: Original Door Trim Design
What about that aluminium-plastic-aluminium stuff that sign places use? Would be a bit quieter than just straight aluminium.

Author:	BlueSuzy [ Wed Nov 30, 2011 10:36 pm ]
Post subject:	Re: Original Door Trim Design
Stolen off ebay, These cars have a few pics on what the designs are originally. So save the pics before they're removed! http://www.ebay.com.au/itm/suzuki-sierr ... 3f109cef6b http://www.ebay.com.au/itm/SUZUKI-SIERR ... 1c214f7aee This one, looks like a dog chewed it, But because they are the wood board, then snap easily: http://www.ebay.com.au/itm/95-suzuki-si ... 1e68deabeb

Author:	Benchai [ Thu Dec 01, 2011 1:13 am ]
Post subject:	Re: Original Door Trim Design
I've costed up some 3mm High Density Polyethyline from the place I got the strips for the soft tops. A finished door trim board should retail for around $20. This stuff is as tough as nails, easy to drill and cut and waterproof and will last forever. I'll get a sheet in and cut up some boards. Thanks for all the links to pics. There's no reason why I can't combine the original design with carbon fibre instead of the poxy patterned vinyl. Stay posted, and thanks again everyone for your help and ideas. Keep them coming

Page 1 of 1	All times are UTC + 9:30 hours
Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/

Author:	alien [ Wed Nov 30, 2011 9:32 pm ]
Post subject:	Re: Original Door Trim Design
actually now you mention it, smooth corflute would work! its bloody cheap too... it does tend to kink though, cos of the hollow bits - singwriters use a pvc stuff as well which can be had in 3mm thick and would be ideal, its UV rated and also not that expensive.

Author:	remydog05 [ Wed Nov 30, 2011 10:57 pm ]
Post subject:	Re: Original Door Trim Design
alien wrote: actually now you mention it, smooth corflute would work! its bloody cheap too... it does tend to kink though, cos of the hollow bits - singwriters use a pvc stuff as well which can be had in 3mm thick and would be ideal, its UV rated and also not that expensive. We used this on my zook a year or so ago. Best thing about it is you can clean it really easy! Just go and ask the local estate agents they get rid of them often.

Author:	BlueSuzy [ Thu Dec 01, 2011 1:31 am ]
Post subject:	Re: Original Door Trim Design
I think even just a plain flat covered door card in carbon look will be better than any original suzuki interior panel

Author:	Damo [ Thu Dec 01, 2011 1:36 am ]
Post subject:	Re: Original Door Trim Design
Hey Benchai, is this what you're after? The one on the red door is from my 89 SJ50. The other door card is from the same vintage vehicle but with the brown interior. That door card on it's own i'm not using. You can have it if it's any use to you.

Author:	Benchai [ Thu Dec 01, 2011 9:04 am ]
Post subject:	Re: Original Door Trim Design
Damo wrote: Hey Benchai, is this what you're after? That door card on it's own i'm not using. You can have it if it's any use to you. Thanks Damo, that's exactly what I'm after, and I'll take you up on your offer. Can you PM me to let me know where to pick it up from? I'm thinking of putting Carbon Fibre vinyl where the coloured bit is, and keeping all the welded lines as per the original.