| auszookers.com http://auszookers.com/forum/ |
|
| G16B.. J20... H20/25/27 Bellhousings http://auszookers.com/forum/viewtopic.php?f=5&t=28217 |
Page 1 of 1 |
| Author: | want33s [ Thu Dec 01, 2011 7:59 am ] |
| Post subject: | G16B.. J20... H20/25/27 Bellhousings |
G16B.. J20... H20/25/27 Bellhousings.... Does anyone know if any or all of them are the same bolt pattern? Thinking the buggy might need more power than a G16B can deliver... H25 would be nice if it'll bolt up... 
I currently have a G16B with a Vit manual bellhousing bolted to a hilux gearbox with an adaptor. I want to know if the engine block OR the gearbox flange on the bellhousing is same for these engines. |
|
| Author: | remydog05 [ Thu Dec 01, 2011 8:13 am ] |
| Post subject: | Re: G16B.. J20... H20/25/27 Bellhousings |
Dont quote me on this but as far as I know J20a is the same as G16b but the flex plate is different to the G16b What have you already got?? Aw4 from a g16b vit?? |
|
| Author: | want33s [ Thu Dec 01, 2011 8:15 am ] |
| Post subject: | Re: G16B.. J20... H20/25/27 Bellhousings |
Sorry.. First post edited. |
|
| Author: | steak_knife [ Thu Dec 01, 2011 8:40 am ] |
| Post subject: | Re: G16B.. J20... H20/25/27 Bellhousings |
remydog05 wrote: Dont quote me on this but as far as I know J20a is the same as G16b but the flex plate is different to the G16b
What have you already got?? Aw4 from a g16b vit?? Been told the same thing, but never tried H is nothing like it.... |
|
| Author: | want33s [ Thu Dec 01, 2011 8:42 am ] |
| Post subject: | Re: G16B.. J20... H20/25/27 Bellhousings |
What about the gearbox to bellhousing pattern? Are they the same? |
|
| Author: | 11_evl [ Thu Dec 01, 2011 9:18 am ] |
| Post subject: | Re: G16B.. J20... H20/25/27 Bellhousings |
lose you suzuki stuff and adaptor and run 3rz or 4age |
|
| Author: | steak_knife [ Thu Dec 01, 2011 9:20 am ] |
| Post subject: | Re: G16B.. J20... H20/25/27 Bellhousings |
want33s wrote: What about the gearbox to bellhousing pattern? Are they the same?
Isn't H the same as Lux..... 
|
|
| Author: | want33s [ Thu Dec 01, 2011 9:53 am ] |
| Post subject: | Re: G16B.. J20... H20/25/27 Bellhousings |
11_evl wrote: lose you suzuki stuff and adaptor and run 3rz or 4age
3RZ is tempting... Even a Hiace 2RZ would be great but it is pushing the ability to still call it a Suzuki. Mind you an RZ is almost a bolt in fit now.
|
|
| Author: | atari4x4 [ Thu Dec 01, 2011 10:12 am ] |
| Post subject: | Re: G16B.. J20... H20/25/27 Bellhousings |
not sure if this is any help... taken from 303zuke's Vitara box/Hilux transfer thread, quitea few pics... http://auszookers.com/index.php?name=Fo ... pic&t=9848 303zuke wrote: The bellhousing and input shaft will fit a 2.5 V6 and the 2.7 V6. Although not used with this gearbox, I understand the 2.0 V6 has the same bolt pattern and will fit this bellhousing. The bellhousing to gearbox pattern is one of the more common adapter types available. For stock factory engines, you could choose from the Suzuki 2.0 V6, 2.5 V6, 2.7 V6, Toyota 2.2lt L, 2.4lt 2L, 2.8lt 3L, or 3.0lt 5L Diesels. Any of the bellhousings used with the W series boxes and Petrol Y family of engines will also fit. Mazda RF 2.0lt Diesel, Peugeot 2.0lt Diesel. Jeep 4.0lt straight 6 or 2.3 4 cyl. Aftermarket adapters are also made to this pattern for Holden V6 and V8 and Red 6 cyl, and even the vintage Ford Sidevalve V8!! kit |
|
| Author: | want33s [ Thu Dec 01, 2011 8:12 pm ] |
| Post subject: | Re: G16B.. J20... H20/25/27 Bellhousings |
Thanks Gus... Looks like I'm looking for a bellhousing to try. |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|