auszookers.com
http://auszookers.com/forum/

Sierra Diff/transfer plugs
http://auszookers.com/forum/viewtopic.php?f=5&t=28310		 Page 1 of 1
Author:  tomtheshooter [ Sun Dec 04, 2011 10:45 pm ]
Post subject:  Sierra Diff/transfer plugs
Just wondering if the Jimny has an external bolt diff/transfer plugs instead of the square inverted ones on sierra's and do they fit?

Did all the gear oils on the weekend and they were a pain in the arse to get off. Plus I went looking in the tool shops for a 10mm square socket and no luck.

Cheers
Tom
Author:  11_evl [ Sun Dec 04, 2011 10:56 pm ]
Post subject:  Re: Sierra Diff/transfer plugs
Just use your 3/8 ratchet or extension.
Author:  303zuke [ Sun Dec 04, 2011 11:13 pm ]
Post subject:  Re: Sierra Diff/transfer plugs
tomtheshooter wrote:
Plus I went looking in the tool shops for a 10mm square socket and no luck.

Cheers
Tom


You can buy them on E-bay
Author:  tomtheshooter [ Mon Dec 05, 2011 1:19 am ]
Post subject:  Re: Sierra Diff/transfer plugs
yea I did end up using my 3/8 ratchet but it was messy :S haha

Never thought of looking on ebay, cheers 303zuke.
Author:  mrw82 [ Mon Dec 05, 2011 3:39 am ]
Post subject:  Re: Sierra Diff/transfer plugs
you can get replacement plugs from any hydraulics or fittings shop (enzed, pirtek, tony powell etc...)

you want a 1/2"BSP plug. you can commonly get them with hex head or allen key head, but other styles may also be available.
Author:  Jazzor [ Mon Dec 05, 2011 4:52 am ]
Post subject:  Re: Sierra Diff/transfer plugs
I bought new ones from LRO as mine were very rounded out:
http://www.lowrangeoffroad.com/index.ph ... plugs.html

I didn't think to try any fitting shops, cheers!.

I don't have a 3/8" set either. Only 1/4" and 1/2" and from a quick look all the 10mm square bits on ebay are only for 3/8 sets.... I guess i could buy a 1/2 > 3/8 adapter then buy one of them :/.
Page 1 of 1 All times are UTC + 9:30 hours
Powered by phpBB® Forum Software © phpBB Group
https://www.phpbb.com/