I found this a great help. Thanks to the legendary Atari4x4
http://auszookers.com/index.php?name=Fo ... ic&t=12526
Passenger side is easy. The drivers side's more hassle, but if I can do it anyone can.
| auszookers.com http://auszookers.com/forum/ |
|
| replacing vitara CV's http://auszookers.com/forum/viewtopic.php?f=5&t=28408 |
Page 1 of 1 |
| Author: | BRAD [ Wed Dec 07, 2011 8:39 am ] |
| Post subject: | replacing vitara CV's |
could anyone please give me some tips on replacing vitara CV's i would really help. thank you |
|
| Author: | buzbox [ Wed Dec 07, 2011 8:49 am ] |
| Post subject: | Re: replacing vitara CV's |
The main thing is to disconnect anything to the hub / brake assembly, you don't have to remove too much but as a minimum and to make things easy I remove the struts, tie rod end and move the brake caliper out of the way, enough for everything to swing away and jiggle the CV out of the hub. The tricky and fun bit is using a strong screwdriver or small prybar to squeeze the CV away from the diff, be careful, it's easy to damage stuff especially the alloy diff. It's a pain of a job but rewarding to know that you will save a couple of hundred bucks by DIY. |
|
| Author: | fritter [ Wed Dec 07, 2011 8:58 am ] |
| Post subject: | Re: replacing vitara CV's |
I found this a great help. Thanks to the legendary Atari4x4 http://auszookers.com/index.php?name=Fo ... ic&t=12526 Passenger side is easy. The drivers side's more hassle, but if I can do it anyone can.
|
|
| Author: | BRAD [ Wed Dec 07, 2011 7:56 pm ] |
| Post subject: | Re: replacing vitara CV's |
Thanks guys 
|
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|