| Author |
Message |
scorpydude
Joined: Mon Nov 01, 2010 9:47 am Posts: 286 Location: South East Brisbane
Vehicle: 02 GV SQ625 + 84 Sierra SJ410
|
 Posted: Thu Dec 15, 2011 8:47 pm |
|
|
Has anyone found a good solution to the Sierra side mirrors wobbling all over the place and being basically useless when on tarmac?
I've tried the 1.0L old style and 1.3L new style mirrors. Pulled them apart and cleaned them up and re-tightened them etc.
So wondering if anyone has come up with a creative fix that doesnt look gastly (like attaching a truck mirror etc)?
|
|
|
|
 |
Teracis
Joined: Sat Dec 11, 2010 10:03 pm Posts: 2261 Location: Gold Coast
Vehicle: Daisy
|
 Posted: Thu Dec 15, 2011 8:55 pm |
|
??? mine work fine as they are, they only move when someone knocks them
Maybe try putting some sticky goop in there or something, I'm not talking full on gluing them, just maybe some kind of tacky stuff that will help it hold and not slip around.
|
|
|
|
 |
Fatzook

az supporter
Joined: Sat Oct 27, 2007 11:30 pm Posts: 14977 Location: The Hills
Vehicle: Vitara, NGV
|
 Posted: Thu Dec 15, 2011 8:59 pm |
|
|
Check your engine mounts and gearbox mounts for breaks. Check that your tyres are not out of balance. It sounds like you are getting some wicked vibrations coming from somewhere!
My ute has the 1.3 mirrors.... its fine. Although the rear vision mirror gets a little vibe up at certain rpms, its not so bad tht it goes out of adjustment or anything.
_________________ 2013 GV 1998 SV420 ute
|
|
|
|
 |
BlueSuzy

az supporter
Joined: Sun May 04, 2008 11:30 pm Posts: 9716 Location: NSW
Vehicle: SJ51 LWB, SJ70 SWB
|
 Posted: Thu Dec 15, 2011 9:59 pm |
|
|
Never had a problems with my stock mirrors..
_________________ BlueSuzy wrote: I'm over the G16b's.
|
|
|
|
 |
scorpydude
Joined: Mon Nov 01, 2010 9:47 am Posts: 286 Location: South East Brisbane
Vehicle: 02 GV SQ625 + 84 Sierra SJ410
|
 Posted: Thu Dec 15, 2011 10:17 pm |
|
|
It's not the mirror moving around (and having to readjust it) that really pissing me off... it's that during normal driving the mirror vibrates enough so that any vision through the mirror is basically useless.
|
|
|
|
 |
Fatzook

az supporter
Joined: Sat Oct 27, 2007 11:30 pm Posts: 14977 Location: The Hills
Vehicle: Vitara, NGV
|
 Posted: Thu Dec 15, 2011 10:19 pm |
|
scorpydude wrote: It's not the mirror moving around (and having to readjust it) that really pissing me off... it's that during normal driving the mirror vibrates enough so that any vision through the mirror is basically useless.
Vibrations aren't caused by the mirrors. You'll need to find the source of the vibes to fix this issue.
_________________ 2013 GV 1998 SV420 ute
|
|
|
|
 |
scorpydude
Joined: Mon Nov 01, 2010 9:47 am Posts: 286 Location: South East Brisbane
Vehicle: 02 GV SQ625 + 84 Sierra SJ410
|
 Posted: Thu Dec 15, 2011 10:29 pm |
|
Alrighty... cheers Pete... i'll track down the good vibrations 
|
|
|
|
 |
Microwire
Joined: Tue Oct 12, 2010 12:40 am Posts: 543 Location: Casula
Vehicle: Vitara 90'
|
 Posted: Fri Dec 16, 2011 12:41 am |
|
You probably will need vibrationless mirrors. They have a vibrator motor in them and a sensor so that they vibrate to the same rate as what they are mounted to so the image appears clear. 
|
|
|
|
 |
steak_knife

az supporter
Joined: Fri May 22, 2009 11:30 pm Posts: 21335 Location: Smart Ass Island
|
 Posted: Fri Dec 16, 2011 7:04 am |
|
Uni's....... 
_________________ I used to be indecisive,
now I'm not so sure.....
|
|
|
|
 |
christover1

az supporter
Joined: Tue Jul 15, 2008 11:30 pm Posts: 8203 Location: Melbourne
Vehicle: Pajero 91 NH 3.0 SWB
|
 Posted: Fri Dec 16, 2011 7:07 am |
|
I used Vitara inside mirrors on my Sierra.
Same fitting.
Narrower obviously,
but that kept them out of tree branches.
Sierra mirrors getting harder to find in good nick.
Vit interior mirrors are often free.

Last edited by christover1 on Fri Dec 16, 2011 7:10 am, edited 1 time in total.
|
|
|
|
 |
abclarke
Joined: Mon Feb 14, 2011 8:19 am Posts: 1966 Location: Couridjah
Vehicle: 1985 Holden Drover
|
 Posted: Fri Dec 16, 2011 7:10 am |
|
Mine are fucked, but thats because my tyres are out of round
Ill get around to getting new ones... eventually...
_________________ 1989 WT Sierra.
|
|
|
|
 |
christover1

az supporter
Joined: Tue Jul 15, 2008 11:30 pm Posts: 8203 Location: Melbourne
Vehicle: Pajero 91 NH 3.0 SWB
|
 Posted: Fri Dec 16, 2011 7:28 am |
|
|
A reversing camera would be wise, too.
Still need mirrors for legality, tho.
|
|
|
|
 |
|