Very nice Rapson!! It just needs a coat of clear
| auszookers.com http://auszookers.com/forum/ |
|
| Painted my Zuk! http://auszookers.com/forum/viewtopic.php?f=5&t=2900 |
Page 1 of 1 |
| Author: | Rapson [ Sun Sep 07, 2008 11:52 pm ] |
| Post subject: | Painted my Zuk! |
Just finished painting my 84 SJ40 and thought I would share some pics. |
|
| Author: | Rapson [ Sun Sep 07, 2008 11:54 pm ] |
| Post subject: | Re: Painted my Zuk! |
And heres before |
|
| Author: | Scrawny [ Mon Sep 08, 2008 12:03 am ] |
| Post subject: | Re: Painted my Zuk! |
Very nice Rapson!! It just needs a coat of clear
|
|
| Author: | steve [ Mon Sep 08, 2008 1:11 am ] |
| Post subject: | Re: Painted my Zuk! |
Paint! Carpet! Doors! gees some people are getting fancy 
|
|
| Author: | hooki [ Mon Sep 08, 2008 5:54 am ] |
| Post subject: | Re: Painted my Zuk! |
very nice mate. how long did the whole process take? |
|
| Author: | Rapson [ Mon Sep 08, 2008 1:51 pm ] |
| Post subject: | Re: Painted my Zuk! |
Hooki it probably took about 3 or 4 days work which I did over about 2 weeks. Stripped most of her down and replaced all the door rubbers and weather strips, I did the bailey channels not to long ago. I used Septone undercoat and Acrilic Jet Black from Super Cheap. As Scrawn said it does need a coat of clear but I have to tidy a few spots up where the paint has come out all rough from the spray gun. Having never sprayed a car before I learnt a few lessons the hard way! I am on a month off at the moment so I should find time to get the clear coat on her. Scrawn, got any advice for getting the clear coat on just right? Tinted the windows as well which was a bit of a mission but happy with the result. |
|
| Author: | Scrawny [ Mon Sep 08, 2008 2:11 pm ] |
| Post subject: | Re: Painted my Zuk! |
Rapson wrote: Scrawn, got any advice for getting the clear coat on just right?
Sorry Rapson, never done any kind of painting other than the spray can type  
Just thought it would look nice with a shiney coat of clear 
|
|
| Author: | Pubic [ Mon Sep 08, 2008 4:12 pm ] |
| Post subject: | Re: Painted my Zuk! |
i heard somewhere if you spray a layer of thinners over the acrylic it brings out the shine..... has anyone heard this before? lookin good rapson. a month off woudl be awesome.... plenty of wheelin to be done in that time! |
|
| Author: | Hybrid [ Mon Sep 08, 2008 5:40 pm ] |
| Post subject: | Re: Painted my Zuk! |
steve wrote: Paint! Carpet! Doors! gees some people are getting fancy
You could make carpet doors for your Steve. Kill two birds with one stone. |
|
| Author: | Rockhopper [ Tue Sep 09, 2008 9:20 pm ] |
| Post subject: | Re: Painted my Zuk! |
I would have painted the colour this way as well, but what you do is paint a nice thick coat of clear on (but not so it runs), wait about 15 minutes to about 1/2 hour so it is tac dry and then thin the paint out a bit more and do the same thing again. By the 4th coat you gun should have around 1/3 clear and 2/3 thinners. Give it one last coat, and when it dries you'll need to put sunglasses on to look at it. I'll post up a couple of photos of my old beemmer when I find them. |
|
| Author: | Rockhopper [ Tue Sep 09, 2008 9:41 pm ] |
| Post subject: | Re: Painted my Zuk! |
Ok. Before respray 
After respray 
Bear in mind this was my first respray. I did go a bit full on as I was able to take my time. It was a bare metal respray. I file finished all bodywork. Painted in acrylic with no clear coat. When paint was dry, I rubbed back the entire car with 1200 wet and dry (wet) then gave it a buff before pinstriping etc. If I had to do it again, I'd do it in 2pac as it's not that hard to paint. |
|
| Author: | 2stroker [ Wed Sep 10, 2008 11:32 pm ] |
| Post subject: | Re: Painted my Zuk! |
Hi Rockhopper, paint on the BMW looks good. Rapson, personally I don't use clear over my acrilic either unless I am using a metalic paint. I usually just put plenty of coats on, thining as you go along as Rockhopper said. Then I block it back with 1200 wet and dry and get into it with the buff using a machine cutting compound, then finish with a polish. I have found that in our Qld climate clear tends to craze, bubble, lift etc within a few years unless you can put it on in a humidity and temp controled environment. It looks good mate, I don't think 4x4's need to be to shiney anyway |
|
| Author: | Damo [ Thu Sep 11, 2008 12:26 am ] |
| Post subject: | Re: Painted my Zuk! |
Viva la hammertone 
Disclaimer: This post is beer powered |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|