| auszookers.com http://auszookers.com/forum/ |
|
| g16a g13b wiring harness http://auszookers.com/forum/viewtopic.php?f=5&t=29580 |
Page 1 of 1 |
| Author: | denty802 [ Sun Jan 15, 2012 2:16 am ] |
| Post subject: | g16a g13b wiring harness |
gday guys, im slowly rebuilding a g16a to put into my 95 sierra, is it possible to use the sierra wiring harness on the vitara motor? the harness out of the vitara was damaged when removing the engine (cut in several places.. not repairable) so yeah just wondering if i will have to get another harness or not, thanks in advance Jesse |
|
| Author: | BlueSuzy [ Sun Jan 15, 2012 3:24 am ] |
| Post subject: | Re: g16a g13b wiring harness |
If the g16a is carb, it is possible to use the original sierra harness for everything. |
|
| Author: | Daves4wd [ Sun Jan 15, 2012 3:34 am ] |
| Post subject: | Re: g16a g13b wiring harness |
I did just need to change the plug on the carb and the vacuum switches to Sierra if you need pics let me know I'll post up for you |
|
| Author: | denty802 [ Sun Jan 15, 2012 3:44 am ] |
| Post subject: | Re: g16a g13b wiring harness |
thanks for the info guys, and if i get stuck i might hit ya up for some photos dave, cheers |
|
| Author: | Daves4wd [ Sun Jan 15, 2012 3:57 am ] |
| Post subject: | Re: g16a g13b wiring harness |
Or if you like I'm in melb to i can show you |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|