| Author |
Message |
[E-Z]
Joined: Mon Oct 25, 2010 7:32 am Posts: 131 Location: sunshine coast QLD
|
 Posted: Mon Jan 02, 2012 10:48 am |
|
|
so i replaced my left bank o2 sensor with a universal one, steak knife seems to mention how shit they are DOH, anyway CEL is still on and still rough idle and a miss. so to rule out (more confirm) the new o2 sensor isnt working, can i just run a piggy back off the driver side o2?
i have done this on my VG30dett when i changed it to single turbo. so i assume the same thing will happen?
just think its getting a signal? and if no change then the right is probably dead too? car has 180Ks
Ryan
|
|
|
|
 |
steak_knife

az supporter
Joined: Fri May 22, 2009 11:30 pm Posts: 21335 Location: Smart Ass Island
|
 Posted: Mon Jan 02, 2012 11:03 pm |
|
|
Put the one you took out in the other bank & see if it make a diffrence.....
What bank did the code say???
& no, don't "piggy back"
_________________ I used to be indecisive,
now I'm not so sure.....
|
|
|
|
 |
[E-Z]
Joined: Mon Oct 25, 2010 7:32 am Posts: 131 Location: sunshine coast QLD
|
 Posted: Tue Jan 03, 2012 1:57 am |
|
|
i binned it, like 7 months ago when i replaced it lol. ill run codes again today
|
|
|
|
 |
steak_knife

az supporter
Joined: Fri May 22, 2009 11:30 pm Posts: 21335 Location: Smart Ass Island
|
 Posted: Tue Jan 03, 2012 2:01 am |
|
|
Look at the coil's for any sign of arcing out to.
Check the earth at the back of the head
Vacuum leak's
Good contact at ECU plug's....
_________________ I used to be indecisive,
now I'm not so sure.....
|
|
|
|
 |
[E-Z]
Joined: Mon Oct 25, 2010 7:32 am Posts: 131 Location: sunshine coast QLD
|
 Posted: Thu Jan 05, 2012 8:28 pm |
|
steak_knife wrote: Look at the coil's for any sign of arcing out to. Check the earth at the back of the head Vacuum leak's Good contact at ECU plug's.... thanks man, should get around to it today i hope!
|
|
|
|
 |
[E-Z]
Joined: Mon Oct 25, 2010 7:32 am Posts: 131 Location: sunshine coast QLD
|
 Posted: Sat Jan 14, 2012 9:12 pm |
|
|
So what's the best o2 to buy? One that is reliable and not $350
|
|
|
|
 |
steak_knife

az supporter
Joined: Fri May 22, 2009 11:30 pm Posts: 21335 Location: Smart Ass Island
|
 Posted: Sat Jan 14, 2012 9:27 pm |
|
Royce got me a plug in from the State's that was 1/2 that price & made buy the people that supply Suzuki..

_________________ I used to be indecisive,
now I'm not so sure.....
|
|
|
|
 |
[E-Z]
Joined: Mon Oct 25, 2010 7:32 am Posts: 131 Location: sunshine coast QLD
|
 Posted: Sun Jan 15, 2012 2:29 am |
|
So I should pm him? 
|
|
|
|
 |
royce

omnipotent being
Joined: Sun Jun 11, 2006 11:30 pm Posts: 17216 Location: Pluto
|
 Posted: Sun Jan 15, 2012 2:34 am |
|
rockauto, you can work the rest out yourself 
|
|
|
|
 |
steak_knife

az supporter
Joined: Fri May 22, 2009 11:30 pm Posts: 21335 Location: Smart Ass Island
|
 Posted: Sun Jan 15, 2012 2:54 am |
|
[E-Z] wrote: So I should pm him?
you could, but he may pull a Mr Fat & not reply.... 
_________________ I used to be indecisive,
now I'm not so sure.....
|
|
|
|
 |
[E-Z]
Joined: Mon Oct 25, 2010 7:32 am Posts: 131 Location: sunshine coast QLD
|
 Posted: Wed Jan 18, 2012 9:44 am |
|
the denso one?
is it direct fit? DENSO Part # 2344084 OE Style
Wire Length 9.84; DENSO is the O.E. Manufacturer; Upstream
deems direct from the pictures 
|
|
|
|
 |
|