| auszookers.com http://auszookers.com/forum/ |
|
| Nt body on wide track chassis http://auszookers.com/forum/viewtopic.php?f=5&t=29702 |
Page 1 of 1 |
| Author: | zammit [ Wed Jan 18, 2012 8:34 pm ] |
| Post subject: | Nt body on wide track chassis |
Hey guys I may have got a rolling chassis for dirt cheap with. Nt body bolt straight on? Or are the chassis different |
|
| Author: | SierraDan [ Wed Jan 18, 2012 8:40 pm ] |
| Post subject: | Re: Nt body on wide track chassis |
Yes. http://auszookers.com/index.php?name=Fo ... y++chassis |
|
| Author: | Gwagensteve [ Wed Jan 18, 2012 8:46 pm ] |
| Post subject: | Re: Nt body on wide track chassis |
Yes. Did you do a search on this - it's been covered a few times. http://www.auszookers.com/index.php?nam ... ic&t=27947 http://www.auszookers.com/index.php?nam ... ic&t=26699 However, there is no good reason to do what you are asking. You want the WT axles under the NT chassis due to the spring spacing and lower roll stiffness of the NT setup. WT spring spacing pretty much just creates the same clearance problem further out - the tyres still hit the springs. Note: WT and NT use a different brake distribution pattern. just bear that in mind when you are swapping master cylinders/lines/bodies/axles. Steve. |
|
| Author: | zammit [ Wed Jan 18, 2012 10:47 pm ] |
| Post subject: | Re: Nt body on wide track chassis |
Awsome thanks Steve! Yeah I searched but I'm at work and my phone is a bit of a pain. I'll keep that in mind, I got a complete car with a stuffed body but a rebuild engine for 200 bucks so I was thinking of doing it up for my misses cause she wants a " cute daily " haha so it I'm bot really worried about the spring spacing ect. |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|