| auszookers.com http://auszookers.com/forum/ |
|
| NT spacing on WT diffs.. http://auszookers.com/forum/viewtopic.php?f=5&t=29709 |
Page 1 of 1 |
| Author: | jmd-247 [ Thu Jan 19, 2012 12:20 am ] |
| Post subject: | NT spacing on WT diffs.. |
as the title says i am getting some info for NT spacing. (ideas for a new build) long story short has any one got some pics of this set up.? with the way the pumpkin sits i cant get my head around the way the perch will sit and enable u bolts to be used sitting on the side of the pumpkin. cheers boys, n ladies 
|
|
| Author: | SierraDan [ Thu Jan 19, 2012 1:52 am ] |
| Post subject: | Re: NT spacing on WT diffs.. |
Look at cars with an NT setup. |
|
| Author: | 2stroker [ Thu Jan 19, 2012 2:37 am ] |
| Post subject: | Re: NT spacing on WT diffs.. |
The WT diff housing is the same as the NT diff housing except the WT obviously wider, the pumpkin is the same so when you fit a WT diff to a NT the spring position in regard to the pumpkin will be the same as it as with a NT housing, it will look exactly the same as it did with the NT housing except that the wheel will be further away from the spring. |
|
| Author: | jimbo_jones [ Thu Jan 19, 2012 9:36 am ] |
| Post subject: | Re: NT spacing on WT diffs.. |
2stroker wrote: The WT diff housing is the same as the NT diff housing except the WT obviously wider, the pumpkin is the same so when you fit a WT diff to a NT the spring position in regard to the pumpkin will be the same as it as with a NT housing, it will look exactly the same as it did with the NT housing except that the wheel will be further away from the spring.
 you hit the nail on the head
|
|
| Author: | jmd-247 [ Thu Jan 19, 2012 12:33 pm ] |
| Post subject: | Re: NT spacing on WT diffs.. |
Beautiful fellas. Not owning a NT ever before I didn't realize this. Sorry of it sounded stupid. Couldn't find anything in search tho. I did try I promise. 
|
|
| Author: | Crunched [ Thu Jan 19, 2012 10:07 pm ] |
| Post subject: | Re: NT spacing on WT diffs.. |
You can see in this pic of my conversion where the original WT perches had been and where the new ones are tacked on. 
|
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|