| auszookers.com http://auszookers.com/forum/ |
|
| Here's one for you http://auszookers.com/forum/viewtopic.php?f=5&t=29768 |
Page 1 of 1 |
| Author: | Ruthless [ Sat Jan 21, 2012 7:35 am ] |
| Post subject: | Here's one for you |
Can someone tell me what is the bolt off it was in my rear passenger side drum and it munched everything up and I can't work out where it goes I just think it must have been left overs from something And also why do I alway break this mount I've bent heaps of them and it can't be the driver it only gets driven on weekends down to the shops and back and it only gets driven like miss daisie 
Cheers 
|
|
| Author: | Scrawny [ Sat Jan 21, 2012 7:49 am ] |
| Post subject: | Re: Here's one for you |
That bolt looks like one of he studs that hold the drum on |
|
| Author: | Ruthless [ Sat Jan 21, 2012 7:52 am ] |
| Post subject: | Re: Here's one for you |
Scrawn wrote: That bolt looks like one of he studs that hold the drum on
That's what I thought but they are all there |
|
| Author: | Scrawny [ Sat Jan 21, 2012 7:54 am ] |
| Post subject: | Re: Here's one for you |
Do any look newish? |
|
| Author: | SierraDan [ Sat Jan 21, 2012 7:59 am ] |
| Post subject: | Re: Here's one for you |
That looks like one of the studs that hold the backing plate to the housing to me. |
|
| Author: | Ruthless [ Sat Jan 21, 2012 8:10 am ] |
| Post subject: | Re: Here's one for you |
Scrawn wrote: Do any look newish?
Nope they all look the same and I've changed the shoes 3 times since I've owned it and never seen it don't know it's come from you would have thought the year and a half I've had it it would have been a problem earlier if it was floating around |
|
| Author: | SierraDan [ Sat Jan 21, 2012 8:41 am ] |
| Post subject: | Re: Here's one for you |
SierraDan wrote: That looks like one of the studs that hold the backing plate to the housing to me.
|
|
| Author: | sogone [ Sat Jan 21, 2012 10:42 am ] |
| Post subject: | Re: Here's one for you |
You running reduction gears in ya t case? I had to add plate to mine so I stopped fuxking em with 6.5s and 33's. |
|
| Author: | MrRocky [ Sat Jan 21, 2012 10:46 am ] |
| Post subject: | Re: Here's one for you |
running twin locked with 6:5's for years and never broke a t-case mount |
|
| Author: | sogone [ Sat Jan 21, 2012 10:51 am ] |
| Post subject: | Re: Here's one for you |
Used to go through them a bit. Might also be the angle of ya case? You using stock mount rubbers. |
|
| Author: | LAY80N [ Sat Jan 21, 2012 11:16 am ] |
| Post subject: | Re: Here's one for you |
SierraDan wrote: :helloo:
SierraDan wrote: That looks like one of the studs that hold the backing plate to the housing to me.  This man, he knows.
Layto.... |
|
| Author: | jimbo_jones [ Sat Jan 21, 2012 12:02 pm ] |
| Post subject: | Re: Here's one for you |
LAY80N wrote: SierraDan wrote: :helloo: SierraDan wrote: That looks like one of the studs that hold the backing plate to the housing to me. This man, he knows.Layto.... yep thats where it came from
|
|
| Author: | zooky08 [ Sat Jan 21, 2012 9:10 pm ] |
| Post subject: | Re: Here's one for you |
jimbo_jones wrote: LAY80N wrote: SierraDan wrote: :helloo: SierraDan wrote: That looks like one of the studs that hold the backing plate to the housing to me. This man, he knows.Layto.... yep thats where it came from To me that bolt is to big to be the backing plate to housing bolt, and can't really tell if it's a hex bolt or looks to have a Allen key hole in the top of it. A backing plate to housing bolt is flat and round, so this bolt won't be it |
|
| Author: | Ruthless [ Sat Jan 21, 2012 10:30 pm ] |
| Post subject: | Re: Here's one for you |
SierraDan wrote: :helloo:
SierraDan wrote: That looks like one of the studs that hold the backing plate to the housing to me. thats what scrawn said and i said all of the bolts are there i thought it was one of them when i firsted looked at it but none look new and none are missing 
|
|
| Author: | Ruthless [ Sat Jan 21, 2012 10:33 pm ] |
| Post subject: | Re: Here's one for you |
sogone wrote: Used to go through them a bit. Might also be the angle of ya case? You using stock mount rubbers.
yea mate in using stock transfer mounts and the case has 4.9's in it with 31's i just reckon its the 130hp motor in front of it because it doesnt break the rubber mounts just loves to bend that bracket |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|