cheers for the help fellas
| auszookers.com http://auszookers.com/forum/ |
|
| Sierra starting problem http://auszookers.com/forum/viewtopic.php?f=5&t=29806 |
Page 1 of 1 |
| Author: | Bugjuice [ Sun Jan 22, 2012 9:42 am ] |
| Post subject: | Sierra starting problem |
Hi, I have a 88.5 sierra with a G13A motor. I thought the battery was dead so replaced it. Turns out i have a bigger issue. Dash lights and stereo works, hit the ignition and it just clicks. You can push start it and it starts and runs, you turn it off and it will start again no worries. Even take it for a run and it will start a couple hours later with no issues. But over night and its dead again, not the battery its holding charge, voltage is still 12.65. Can anyone offer and advice? I did think maybe starter solenoid, i dont really know much about solenoids so am happy for someone to enlighten me. Cheers Bugjuice |
|
| Author: | jackoliveshere [ Sun Jan 22, 2012 9:46 am ] |
| Post subject: | Re: Sierra starting problem |
yeah im having a problem starting my sierra now...doesnt start straight away but eventually it does... my voltage was fine - 12.7 i think it was. then with car turned on it was over 14 volts so i know alternator is fine...did u test your voltage with motor on? think my starter motor might be dodgy...or might be the cables...they look pretty shitty atm. |
|
| Author: | Joshyboy26 [ Sun Jan 22, 2012 9:51 am ] |
| Post subject: | Re: Sierra starting problem |
Its known as the dreaded clicky start and is very common on sierras a few of the other boys might chime in soon but do a search on clicky starter and ull find u can buy an upgraded wiring package. It has to do with the starter motor not getting enough power from the stock wiring |
|
| Author: | jimmey [ Sun Jan 22, 2012 10:10 am ] |
| Post subject: | Re: Sierra starting problem |
or your battery nutruel isnt connected, try that. |
|
| Author: | abclarke [ Sun Jan 22, 2012 10:13 am ] |
| Post subject: | Re: Sierra starting problem |
Joshyboy26 wrote: Its known as the dreaded clicky start and is very common on sierras a few of the other boys might chime in soon but do a search on clicky starter and ull find u can buy an upgraded wiring package. It has to do with the starter motor not getting enough power from the stock wiring
Sounds like a similar problem mine had. You can keep trying and trying and it eventually gets it? I got one of Royces starter looms and havnt had a drama since! |
|
| Author: | Joshyboy26 [ Sun Jan 22, 2012 10:15 am ] |
| Post subject: | Re: Sierra starting problem |
http://auszookers.com/index.php?name=Ne ... cle&sid=40 |
|
| Author: | Daves4wd [ Sun Jan 22, 2012 10:36 am ] |
| Post subject: | Re: Sierra starting problem |
Could ve your solenoid on you starter or your actual starter it might fix it try start it when it clicks give the stater a few taps with a hammer and try again if it starts it's stater |
|
| Author: | abclarke [ Sun Jan 22, 2012 8:10 pm ] |
| Post subject: | Re: Sierra starting problem |
Joshyboy26 wrote: http://auszookers.com/index.php?name=News&file=article&sid=40
I'd go with that, and hey it's only $30 so it's worth a shot right? |
|
| Author: | youda [ Sun Jan 22, 2012 11:59 pm ] |
| Post subject: | Re: Sierra starting problem |
mine does this, give the starter solinoid a tap with a hammer, if it starts then i would say your up for a new solenoid. |
|
| Author: | Bugjuice [ Mon Jan 23, 2012 3:20 am ] |
| Post subject: | Re: Sierra starting problem |
Cheers guys, Ill give it a whirl when i get home tonight. Yeah its 13.5 volts when charging! Interesting clicky starter ill see how it goes. Bugjuice |
|
| Author: | dawsey [ Mon Jan 23, 2012 5:26 am ] |
| Post subject: | Re: Sierra starting problem |
this is the 1 I got,.... http://www.lowrangeoffroad.com/clicky-starter-kit.html mine completely gave in about 2 years ago..never had a problem since, actually forgot I even fitted it. |
|
| Author: | jackoliveshere [ Mon Jan 23, 2012 6:08 am ] |
| Post subject: | Re: Sierra starting problem |
cheers for the help fellas
|
|
| Author: | Bugjuice [ Mon Jan 23, 2012 9:15 pm ] |
| Post subject: | Re: Sierra starting problem |
Well i figured out that its the solenoid. Tap with a hammer and away we go. That will give me something to do over the long weekend. Thanks for the help! |
|
| Author: | Hybrid [ Mon Jan 23, 2012 9:35 pm ] |
| Post subject: | Re: Sierra starting problem |
Regardless I'd still be upgrading the loom. The voltage drop on the stock one is too high. They start like a different car after doing it. |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|