And heavier than the standard tub.
And your fridge magnets won't stick to it either
| auszookers.com http://auszookers.com/forum/ |
|
| Stainlless Steel Sierra http://auszookers.com/forum/viewtopic.php?f=5&t=29995 |
Page 1 of 1 |
| Author: | TasRat [ Sun Jan 29, 2012 7:42 pm ] |
| Post subject: | Stainlless Steel Sierra |
Anyone heard of a factory stainless steel bodied sierra I'm told there is one nearby, possibly soft top. |
|
| Author: | zooky08 [ Sun Jan 29, 2012 7:48 pm ] |
| Post subject: | Re: Stainlless Steel Sierra |
You mean aluminum body |
|
| Author: | stockman [ Sun Jan 29, 2012 7:51 pm ] |
| Post subject: | Re: Stainlless Steel Sierra |
Low range offer an aluminum LWB body, but I have never seen or heard of a stainless. |
|
| Author: | Fatzook [ Sun Jan 29, 2012 7:53 pm ] |
| Post subject: | Re: Stainlless Steel Sierra |
Stainless would crack up like a Sao biscuit. |
|
| Author: | abclarke [ Sun Jan 29, 2012 8:07 pm ] |
| Post subject: | Re: Stainlless Steel Sierra |
Plus be worth a fortune.... |
|
| Author: | Fatzook [ Sun Jan 29, 2012 8:44 pm ] |
| Post subject: | Re: Stainlless Steel Sierra |
And heavier than the standard tub. And your fridge magnets won't stick to it either
|
|
| Author: | GRPABT1 [ Sun Jan 29, 2012 8:54 pm ] |
| Post subject: | Re: Stainlless Steel Sierra |
Suzuki Delorean? lol |
|
| Author: | alexvitara [ Sun Jan 29, 2012 8:55 pm ] |
| Post subject: | Re: Stainlless Steel Sierra |
and would scratch badly |
|
| Author: | BlueSuzy [ Sun Jan 29, 2012 8:56 pm ] |
| Post subject: | Re: Stainlless Steel Sierra |
Can you imagine the finger prints? omg The delorean was brushed stainless. Cool concept, but not practical. Scratch? rub it with steel wool 
|
|
| Author: | Fatzook [ Sun Jan 29, 2012 8:57 pm ] |
| Post subject: | Re: Stainlless Steel Sierra |
alexvitara wrote: and would scratch badly Scotch brite pad 
|
|
| Author: | alexvitara [ Sun Jan 29, 2012 9:06 pm ] |
| Post subject: | Re: Stainlless Steel Sierra |
Fatzook wrote: alexvitara wrote: and would scratch badly Scotch brite pad you can never match the grain nicely, it would look all patchy |
|
| Author: | Fatzook [ Sun Jan 29, 2012 9:09 pm ] |
| Post subject: | Re: Stainlless Steel Sierra |
alexvitara wrote: Fatzook wrote: alexvitara wrote: and would scratch badly Scotch brite pad you can never match the grain nicely, it would look all patchy I've been doing it for years. But a bertex wheel goes alright too. |
|
| Author: | 2stroker [ Mon Jan 30, 2012 8:41 am ] |
| Post subject: | Re: Stainlless Steel Sierra |
There was some pics in a 4x4 mag a while back of stainless steel cj3 jeep replica's made in the phillipines, it is prob one of them |
|
| Author: | Damo [ Mon Jan 30, 2012 12:26 pm ] |
| Post subject: | Re: Stainlless Steel Sierra |
Replacement aluminum  bodies
|
|
| Author: | TasRat [ Mon Jan 30, 2012 3:37 pm ] |
| Post subject: | Re: Stainlless Steel Sierra |
2stroker wrote: There was some pics in a 4x4 mag a while back of stainless steel cj3 jeep replica's made in the phillipines, it is prob one of them This could be it, I rolled my eyes & thought Delorian too, but the story goes it came from Philipines and is only one in Aust. Ford built some S/S cars including a 60TBird The S/S is hard on die's so they often only do it at the end of production |
|
| Author: | Gwagensteve [ Mon Jan 30, 2012 6:19 pm ] |
| Post subject: | Re: Stainlless Steel Sierra |
Apparently Ford only built two stainless '60 square birds: Quote: On early models, built through the end of December 1959, there was a smooth belt molding; this was corrugated on cars built in 1960. The '60 model also used a number of stainless-steel components, and two were actually built entirely of stainless steel by one of Ford's suppliers, Allegheny-Ludlum Steel Corporation. Steve. |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|