If you're only after a Drivers seat replacement, i have a Stratos Seat which i pulled out of mine. It's light grey in colour, has a few little marks on it, but in fairly good condition.
Same kind of seat as this, drivers side only though.
| auszookers.com http://auszookers.com/forum/ |
|
| seats http://auszookers.com/forum/viewtopic.php?f=5&t=3067 |
Page 1 of 1 |
| Author: | mcwilly [ Thu Oct 02, 2008 2:38 pm ] |
| Post subject: | seats |
hi i was just wondering what seats people have put in their sierras. i have a 96 model and wanna upgrade seats is there any direct bolt up seats eg swift etc |
|
| Author: | Damo [ Thu Oct 02, 2008 2:40 pm ] |
| Post subject: | Re: seats |
mcwilly wrote: hi i was just wondering what seats people have put in their sierras. i have a 96 model and wanna upgrade seats is there any direct bolt up seats eg swift etc
Nothing that I am aware of bolts up. Make sure you measure the width when you go looking for donors, zook seats are pretty narrow. |
|
| Author: | kanejones [ Thu Oct 02, 2008 3:06 pm ] |
| Post subject: | Re: seats |
Mine had the orange and black 'sports' seats in them.. They were ripped up pretty bad, so I've just thrown some stock hardtop seats in. Very comfy - not looking forward to the rain though! |
|
| Author: | mcwilly [ Thu Oct 02, 2008 5:13 pm ] |
| Post subject: | Re: seats |
yea id like to get some vinyl seats so that if they get wet i just wipe them off with a towl. anyone selling zook seats |
|
| Author: | kanejones [ Thu Oct 02, 2008 5:34 pm ] |
| Post subject: | Re: seats |
Im looking to sell my old ones if your interested.. They're ripped up pretty bad though.. |
|
| Author: | mcwilly [ Thu Oct 02, 2008 5:38 pm ] |
| Post subject: | Re: seats |
possible to post up a few pics |
|
| Author: | Trojan [ Thu Oct 02, 2008 8:20 pm ] |
| Post subject: | Re: seats |
If you're only after a Drivers seat replacement, i have a Stratos Seat which i pulled out of mine. It's light grey in colour, has a few little marks on it, but in fairly good condition. Same kind of seat as this, drivers side only though.
|
|
| Author: | mcwilly [ Thu Oct 02, 2008 10:39 pm ] |
| Post subject: | Re: seats |
i need both drivers and passengers side as the ones i have in the car atm wont pass rego and are very uncomfy |
|
| Author: | kanejones [ Thu Oct 02, 2008 11:03 pm ] |
| Post subject: | Re: seats |
Im in melbourne so it might be a bit costly for you.. And as far as being roadworthy, the seats I have would need a lot of repairing to get them there. I can't post pics up, but if you leave me your mobile number or email address, I might be able to send them to you from my phone. |
|
| Author: | royce [ Thu Oct 02, 2008 11:07 pm ] |
| Post subject: | Re: seats |
either prelude or integra seats need a little bit of filing to the sierra runners to bolt straight up, nice fit too |
|
| Author: | tonka_zook [ Fri Oct 03, 2008 1:48 am ] |
| Post subject: | Re: seats |
i got a set of stratos seats in mine and all i had to do is make up some brackets for the runners |
|
| Author: | mcwilly [ Fri Oct 03, 2008 4:38 pm ] |
| Post subject: | Re: seats |
ok turns out i have a passngers seat which is ok, but need a factory drivers seat to pass for a blue slip. this is turning into a real mission to find standard seats. no wreckers in newcastle have any. |
|
| Author: | weaves [ Sat Oct 04, 2008 3:18 pm ] |
| Post subject: | Re: seats |
you have a zook chris? when we wheeling? i need to put a few more dents in mine. i have a pair of R33 seats which i'm trying to work out the best way to mount at teh moment. if you need. and if its viable. you could BORROW my standard one to pass blue slip. dont think they would like it though as mins 11 years older than your and is torn to shit. but if it would work we could just do a quick swap |
|
| Author: | mcwilly [ Sat Oct 04, 2008 10:05 pm ] |
| Post subject: | Re: seats |
hey hey yea sure do the astina is gonna be running 11sec quarters soon so needed another car lol. im looking into just buying some cheapish buckets and getting it engineered now as its way to hard to find standard seats, never mind ones in ok condition. yea we'll have to go out i wont be goin crazy for a bit gotta learn how to 4b first |
|
| Author: | mcwilly [ Sun Oct 05, 2008 4:00 pm ] |
| Post subject: | Re: seats |
ok im looking at aftermarket seats now and found some i dont mind. I just need to know wat the distances between the mounting holes are on the factory seat rails? Distances of seat are front to back either 310mm or 290mm Side to side are 390mm this is the one im mainly worried about Thanks |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|