shep wrote:
Comedy gold...9inch with thongs and ball with not much hair
Oh yeh...and a good way to mount a winch bar 
| auszookers.com http://auszookers.com/forum/ |
|
| Sierra mounts? http://auszookers.com/forum/viewtopic.php?f=5&t=30714 |
Page 1 of 1 |
| Author: | ridzilla [ Fri Feb 24, 2012 9:50 pm ] |
| Post subject: | Sierra mounts? |
Hey guys, I have been mucking around with my winchbar and have absolutely no idea how to mount it and there's a pretty limited amount of space at the chassis rails! just chasing and info/pics as to how any of you have got by this in the past or how you plan to do it, I'll upload a photo of my front end tomorrow incase it differs or someone could suggest something. Thanks a bunch in advance |
|
| Author: | Fatzook [ Fri Feb 24, 2012 9:57 pm ] |
| Post subject: | Re: Sierra mounts? |
What winch bar? Is it home made? More important than pics of your chassis, is pics of your bar. Depending on how it has been built, you may or may not be able to use the same methods as others have. |
|
| Author: | ridzilla [ Fri Feb 24, 2012 10:08 pm ] |
| Post subject: | Re: Sierra mounts? |
Yeah man, homemade at work haha, but it's essentially just 100x50x5mm Channel which has indicators and winch hole machined into it. I've capped the ends, and sunk the winch into it but yeah, just the mounts is where I'm going wrong... I'll jump onto the photos tomorrow at work and shoot them up here |
|
| Author: | shep [ Sat Feb 25, 2012 7:21 am ] |
| Post subject: | Re: Sierra mounts? |
all ya need to know. viewtopic.php?f=14&t=7930&hilit=balls+winch+bar+mounts |
|
| Author: | Rusho [ Sat Feb 25, 2012 7:25 am ] |
| Post subject: | Re: Sierra mounts? |
shep wrote: Comedy gold...9inch with thongs and ball with not much hair Oh yeh...and a good way to mount a winch bar
|
|
| Author: | ridzilla [ Sat Feb 25, 2012 3:34 pm ] |
| Post subject: | Re: Sierra mounts? |
Hahha cheers mate! reckon you could knock some plates up for us? |
|
| Author: | monley [ Sat Feb 25, 2012 7:09 pm ] |
| Post subject: | Re: Sierra mounts? |
ridzilla wrote: Hahha cheers mate! reckon you could knock some plates up for us? Aren't you a boiler maker? Oh wait, all your brains fell out and you deiceded to go welding full time instead aye?
|
|
| Author: | ridzilla [ Sat Feb 25, 2012 8:27 pm ] |
| Post subject: | Re: Sierra mounts? |
 welding is the shit! but only if it's FCNah wanting his measurements, and I'm flat out at work not gonna get time to make some up |
|
| Author: | monley [ Sat Feb 25, 2012 8:30 pm ] |
| Post subject: | Re: Sierra mounts? |
FC  you can weld that shit with your eye's closed Why not just make them at lunch time?
|
|
| Author: | ridzilla [ Sat Feb 25, 2012 9:01 pm ] |
| Post subject: | Re: Sierra mounts? |
as with MIG haha! Flux justs looks better and it flows down so smoothly Only have half hour and usually don't stop work |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|