It helps having one stashed in the shed here at work
| auszookers.com http://auszookers.com/forum/ |
|
| Draglink http://auszookers.com/forum/viewtopic.php?f=5&t=3078 |
Page 1 of 1 |
| Author: | ZookiDave [ Fri Oct 03, 2008 1:13 pm ] |
| Post subject: | Draglink |
Hi all Can anyone tell me how long a standard drag link (from steering box to passanger side) for a 88 WT sierra should be. I replaced mine last night as the original ressembled a bomarang, and stupid me, after bolting it all up didn't check if it drove right, i noticed on my way to work this morning that i dont get full lock when turning left, i only get 1 rotation of the steering wheel. im thinking that i was sold a NT link instead of WT. |
|
| Author: | Scrawny [ Fri Oct 03, 2008 1:25 pm ] |
| Post subject: | Re: Draglink |
From centre to centre of ball joints should be 770mm |
|
| Author: | ZookiDave [ Fri Oct 03, 2008 1:29 pm ] |
| Post subject: | Re: Draglink |
Cheers mate, Thanx 4 the quick response |
|
| Author: | Scrawny [ Fri Oct 03, 2008 1:34 pm ] |
| Post subject: | Re: Draglink |
It helps having one stashed in the shed here at work
|
|
| Author: | ZookiDave [ Fri Oct 03, 2008 1:36 pm ] |
| Post subject: | Re: Draglink |
Im guessing that a NT messures 725mm cen to cen |
|
| Author: | Scrawny [ Fri Oct 03, 2008 2:55 pm ] |
| Post subject: | Re: Draglink |
Is that what your current one measures? |
|
| Author: | ZookiDave [ Fri Oct 03, 2008 3:27 pm ] |
| Post subject: | Re: Draglink |
yup unfortunatly |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|