how about going outside & having a look?
| auszookers.com http://auszookers.com/forum/ |
|
| How do you take Bull bar off ?? http://auszookers.com/forum/viewtopic.php?f=5&t=30850 |
Page 1 of 1 |
| Author: | IN2DEP [ Thu Mar 01, 2012 8:24 am ] |
| Post subject: | How do you take Bull bar off ?? |
Hey guys How hard is it to remove an ARB Bull Bar with winch ?? Im going to take it off and cut back the out riggers then take it to the shop and get them to custom fit it cheers keith |
|
| Author: | sogone [ Thu Mar 01, 2012 9:05 am ] |
| Post subject: | Re: How do you take Bull bar off ?? |
Not very hard. 3 bolts each side. |
|
| Author: | abclarke [ Thu Mar 01, 2012 9:49 am ] |
| Post subject: | Re: How do you take Bull bar off ?? |
Yep as sogone said, simple enough taking the bolts out BUT you might want a hand from someone else to support it or stick some stands under to take the weight. |
|
| Author: | IN2DEP [ Thu Mar 01, 2012 10:59 am ] |
| Post subject: | Re: How do you take Bull bar off ?? |
is the winch bolted to the bar ?? do i need to take off the rollers first ?? |
|
| Author: | atari4x4 [ Thu Mar 01, 2012 11:02 am ] |
| Post subject: | Re: How do you take Bull bar off ?? |
how about going outside & having a look?
|
|
| Author: | IN2DEP [ Thu Mar 01, 2012 11:21 am ] |
| Post subject: | Re: How do you take Bull bar off ?? |
atari4x4 wrote: how about going outside & having a look? No point looking if i dont know what im looking for, now i know where and what to look out Thanks guys for the help 
|
|
| Author: | Scrawny [ Thu Mar 01, 2012 11:28 am ] |
| Post subject: | Re: How do you take Bull bar off ?? |
Just keep undoing bolts till it falls on your head |
|
| Author: | JrZook [ Thu Mar 01, 2012 12:36 pm ] |
| Post subject: | Re: How do you take Bull bar off ?? |
^^^ This guy! |
|
| Author: | IN2DEP [ Thu Mar 01, 2012 1:31 pm ] |
| Post subject: | Re: How do you take Bull bar off ?? |
Scrawn wrote: Just keep undoing bolts till it falls on your head Hahhaha I like that one
|
|
| Author: | IN2DEP [ Sat Mar 03, 2012 3:38 pm ] |
| Post subject: | Re: How do you take Bull bar off ?? |
no need to take the bar off, I unbolted the 3 bolts on the out riggers then used my 4" grinda to cut them off, might have to bash the seems back at the back of the wheel arch, but i took it for a drive around the block and no scrubbing on the 32s but thats no flexing at all, but bumpy as all f@#k but im still running the stock shooks witch they are full open just sitting there so next thing is, is to weld the shock mounts on Oh and ill have to custom mount the bull bar, there is no way it can hold with just the center bolts, the bar is moving up and down |
|
| Author: | jimbo_jones [ Sat Mar 03, 2012 7:00 pm ] |
| Post subject: | Re: How do you take Bull bar off ?? |
Yeah you will need to beef up the mounts don't use the winch till you do |
|
| Author: | IN2DEP [ Mon Mar 05, 2012 5:04 am ] |
| Post subject: | Re: How do you take Bull bar off ?? |
jimbo_jones wrote: Yeah you will need to beef up the mounts don't use the winch till you do Well thats good then lol my winch is bugged anyway lol |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|