auszookers.com
http://auszookers.com/forum/

Rim painting or powdercoating
http://auszookers.com/forum/viewtopic.php?f=5&t=30891		 Page 1 of 1
Author:  Scales [ Sat Mar 03, 2012 2:15 pm ]
Post subject:  Rim painting or powdercoating
Hey guys,

sitting here thinking about painting my rims or getting em powdercoated. was just wondering if anyone has been down the painting path and regretted it or vise versa?
these are the rims (not on the car atm)

Image

was going to go for a semi-gloss black in both cases. im thinking its going to be cheaper going down the DIY path but im a bit concerned with it only lasting 6 months.
i read the other thread on here viewtopic.php?f=17&t=25381&hilit=painting+wheels


Do i need to do anything different for alloy rims? im thinking i might use some primer filler to get rid of some minor dings? is it worth the saving vs effort?

How much would i expect to take a rim down and get powdercoated?


BTW these are my road rims, wont be doing any wheeling with them on if thats a factor. maybe the odd dirt road, you get the idea.
Author:  Joe [ Sat Mar 03, 2012 3:29 pm ]
Post subject:  Re: Rim painting or powdercoating
I vote for powder coating should only cost $50 to $60 bucks a rim

I'm getting these wheels done in black soonish

Image
Author:  want33s [ Sat Mar 03, 2012 3:40 pm ]
Post subject:  Re: Rim painting or powdercoating
On a steel rim I would say Killrust black or white or pink.. whatever...

On an alloy rim it would come down to budget and/or desired colour/finish.

Powdercoating rims means stripping tyres, refitting tyres and then rebalancing, none of which is needed to just paint them.
Author:  alien [ Sat Mar 03, 2012 4:03 pm ]
Post subject:  Re: Rim painting or powdercoating
i got my rims done locally for $50ea which included sandblasting, priming and powdwercoating.... pretty cheap really, and the finish is great (and strong!)
Author:  atari4x4 [ Sat Mar 03, 2012 4:06 pm ]
Post subject:  Re: Rim painting or powdercoating
if you're going to get them powder coated, get them zinc plated first so they wont rust under the powder coat
Author:  Joe [ Sat Mar 03, 2012 4:09 pm ]
Post subject:  Re: Rim painting or powdercoating
atari4x4 wrote:
if you're going to get them powder coated, get them zinc plated first so they wont rust under the powder coat


There alloy rims :lol:
Author:  atari4x4 [ Sat Mar 03, 2012 4:23 pm ]
Post subject:  Re: Rim painting or powdercoating
:oops: i should read more before posting.
Author:  Scales [ Sat Mar 03, 2012 4:29 pm ]
Post subject:  Re: Rim painting or powdercoating
LOL i was like wtf???

cool, well if its only fitty bucksish ill ring around next week and probs go with powder. i dont mind having to take the rubber off.
Author:  Scales [ Sat Mar 03, 2012 4:55 pm ]
Post subject:  Re: Rim painting or powdercoating
out of curiosity, can anyone tell me what to tell the tyre shop when im looking for a alloy rim. every shop ive rang or gone to they just go "nah not jimnys mate"

so im thinking if i can tell them a size,pitch and offset etc they will stop blowing me off and tell me what i can fit (cos sounds like they just cbf looking up what size they are, lazy pricks)

cos i was just thinking might be just as exxy to get some new alloys.
Author:  alien [ Sat Mar 03, 2012 5:38 pm ]
Post subject:  Re: Rim painting or powdercoating
just ask for king rims, 15x7 in a neg 13, 5 on 5.5 (139.7)
http://www.kingwheels.com.au/index.php? ... duct_id=64

you'd want to be running a 235/75 on a 7" rim though.

if you're under that just keep the stockers.
Author:  DarkHorse [ Sat Mar 03, 2012 8:49 pm ]
Post subject:  Re: Rim painting or powdercoating
I had a PC place this week tell me they wouldn't do alloys (or they would, but they wouldn't guarantee the results) because of the risk of imperfections and bubbles in the casting potentially surfacing during the baking and ruining the finish.

First I've heard of it... anyone got any knowledge to support or deny?

Otherwise the quote was $65 per rim for blasting and coating, which was the best I got from a quick ring around Sydney.
Author:  Scales [ Sun Mar 04, 2012 5:12 am ]
Post subject:  Re: Rim painting or powdercoating
alien wrote:
just ask for king rims, 15x7 in a neg 13, 5 on 5.5 (139.7)
http://www.kingwheels.com.au/index.php? ... duct_id=64

you'd want to be running a 235/75 on a 7" rim though.

if you're under that just keep the stockers.



Thanks mate, already got a set of sunnys though with my km2's (that pic is pretty damn old, just used it for the alloy photo)

but ill use that info to get some info on some alloys though. i dont have any stock alloys. i might look at 6" rims, see what happens.
Author:  monley [ Sun Mar 04, 2012 11:28 am ]
Post subject:  Re: Rim painting or powdercoating
DarkHorse wrote:
I had a PC place this week tell me they wouldn't do alloys (or they would, but they wouldn't guarantee the results) because of the risk of imperfections and bubbles in the casting potentially surfacing during the baking and ruining the finish.

First I've heard of it... anyone got any knowledge to support or deny?

Otherwise the quote was $65 per rim for blasting and coating, which was the best I got from a quick ring around Sydney.


Omalley had his alloy rim's powder coated
Image
Author:  buzbox [ Sun Mar 04, 2012 11:44 am ]
Post subject:  Re: Rim painting or powdercoating
Obviously powdercoat will look more proffessional and is more durable than paint. But for a cheap DIY solution, painting the wheels will be a fraction of the cost. Sure it may need some touching up once a year or so but a spray can or two doesn't cost too much.
Author:  fully sick coily [ Sun Mar 04, 2012 6:50 pm ]
Post subject:  Re: Rim painting or powdercoating
call unicoatings theyl do you a great deal :)
Author:  Scales [ Mon Mar 05, 2012 8:37 am ]
Post subject:  Re: Rim painting or powdercoating
um, im in Townsville....... thats a bit north of Brisbane if your not near a map ;)

just rang all the powdercoaters in town (all 3 of them) and cheapest is 88 bux a rim.
Author:  Blakey [ Mon Mar 05, 2012 10:24 am ]
Post subject:  Re: Rim painting or powdercoating
Joe wrote:
atari4x4 wrote:
if you're going to get them powder coated, get them zinc plated first so they wont rust under the powder coat


There alloy rims :lol:


alloy still corrodes the same as steel/iron, by oxidation caused by an impure water/oxygen mix and or other chemicals or electro chemical reactions.

its seen as the whiteish substace on aluminium

alloys such as aluminium just have a stronger Passivation layer. preventing the surface breakdown of the material. as well as a oxidation layer that forms when aluminium is exposed to air

but the end effect is the same causing damage and weakening of the material.
Author:  Scales [ Mon Mar 05, 2012 11:37 am ]
Post subject:  Re: Rim painting or powdercoating
thats a nice colour black on those rims, was thinking of going semi-gloss but that looks pretty flash. is that coral-black?
Author:  Fatzook [ Mon Mar 05, 2012 12:12 pm ]
Post subject:  Re: Rim painting or powdercoating
Scales wrote:
thats a nice colour black on those rims, was thinking of going semi-gloss but that looks pretty flash. is that coral-black?



Saturn (satin) black.
Author:  atari4x4 [ Mon Mar 05, 2012 12:17 pm ]
Post subject:  Re: Rim painting or powdercoating
satin black.... they are a bit dirty atm.

Image

matt black will be harder to clean & keep clean due to the textured finish, what would be cool is a matt centre & a gloss lip
Author:  Scales [ Mon Mar 05, 2012 1:13 pm ]
Post subject:  Re: Rim painting or powdercoating
nice
they have a color called coral black which is pretty close to that, a bit glossier but not as bad as a regular gloss. Ill see how i go
Author:  remydog05 [ Mon Mar 05, 2012 9:08 pm ]
Post subject:  Re: Rim painting or powdercoating
Hunt around for pricing!
i called a few places to get my beadlock rims sandblasted and powdercoated.
1 place $175 per wheel!
The place I found eventually, $50 per wheel striped, and re coated!!!!!!!!!!!
Im taking them there in the morning and he said should be a 3 day turnaround.
Author:  Fatzook [ Mon Mar 05, 2012 9:28 pm ]
Post subject:  Re: Rim painting or powdercoating
These cost $75 each to powdercoat. They were and absolute PITA I am told.

So a standard wheel should be no more than $60.

Image
Author:  Fatzook [ Mon Mar 05, 2012 9:31 pm ]
Post subject:  Re: Rim painting or powdercoating
Should have clear coated them when they looked like this 8)

Image
Image
Author:  Scales [ Tue Mar 06, 2012 2:45 pm ]
Post subject:  Re: Rim painting or powdercoating
remydog05 wrote:
Hunt around for pricing!
i called a few places to get my beadlock rims sandblasted and powdercoated.
1 place $175 per wheel!
The place I found eventually, $50 per wheel striped, and re coated!!!!!!!!!!!
Im taking them there in the morning and he said should be a 3 day turnaround.



like i said guys, i rang every powder coater in town (all 3 of them) and 88 was the cheapest. so thats the extent of my hunting around.
Author:  jason_sgt [ Fri Mar 09, 2012 12:26 am ]
Post subject:  Re: Rim painting or powdercoating
I must say, just painted my stock vit rims with the paint from autobarn. They have come up a treat, how long they stay that way is yet to be seen, but after the best part of 20 years service I figured they can't look any worse! thinking the alloy bullbar could use some paint to match now, not sure how it will stick though.
Author:  Fatzook [ Fri Mar 09, 2012 7:34 am ]
Post subject:  Re: Rim painting or powdercoating
jason_sgt wrote:
I must say, just painted my stock vit rims with the paint from autobarn. They have come up a treat, how long they stay that way is yet to be seen, but after the best part of 20 years service I figured they can't look any worse! thinking the alloy bullbar could use some paint to match now, not sure how it will stick though.



You will need a GOOD quality alloy ( all surface ) primer. You may need to 2000 grit wet and dry it first to help adhesion. And ofcoarse it will need to be super clean.
Author:  Scales [ Sat Mar 10, 2012 4:44 pm ]
Post subject:  Re: Rim painting or powdercoating
well i think i might be scrapping the powdercoat idea and just running with the km2's 100% duty. its probably cheaper forking out for a spare steely and an extra km2.

i had the alloys on today and was pretty disgusted with it, handling went shit and it just looks poo.

if i ever have the need to get H/T's ill just get another set of sunnys
Page 1 of 1 All times are UTC + 9:30 hours
Powered by phpBB® Forum Software © phpBB Group
https://www.phpbb.com/