| auszookers.com http://auszookers.com/forum/ |
|
| which motor http://auszookers.com/forum/viewtopic.php?f=5&t=3097 |
Page 1 of 1 |
| Author: | Mike [ Sun Oct 05, 2008 11:25 pm ] |
| Post subject: | which motor |
i've got a g13a and a g13b and they both have a similar amount of ks on them and was wondering which is the better motor Cheers |
|
| Author: | royce [ Sun Oct 05, 2008 11:39 pm ] |
| Post subject: | Re: which motor |
whichever is in better condition |
|
| Author: | Mike [ Sun Oct 05, 2008 11:45 pm ] |
| Post subject: | Re: which motor |
are there any differences between the 2? |
|
| Author: | Chinny [ Sun Oct 05, 2008 11:49 pm ] |
| Post subject: | Re: which motor |
A G13B is a Gti twin cam EFI motor from a swift. |
|
| Author: | Mike [ Sun Oct 05, 2008 11:52 pm ] |
| Post subject: | Re: which motor |
i got a g13ba my sierra came out with it |
|
| Author: | royce [ Sun Oct 05, 2008 11:55 pm ] |
| Post subject: | Re: which motor |
the G13b (and for all intents and purposes we are talking 8valve carby motors here) is a bit smaller and I think a bit shorter stroke but if you can tell any difference in driving you are doing well |
|
| Author: | zooker [ Sun Oct 05, 2008 11:58 pm ] |
| Post subject: | Re: which motor |
Chinny wrote: A G13B is a Gti twin cam EFI motor from a swift.
Correct. But if its actually a G13BA you have then only difference AFAIK is capacity. G13A = 1324 cc /SOHC 8V carby G13BA = 1298 cc / SOHC 8V carby |
|
| Author: | foolsp33d [ Mon Oct 06, 2008 2:28 am ] |
| Post subject: | Re: which motor |
zooker wrote: Chinny wrote: A G13B is a Gti twin cam EFI motor from a swift. Correct. But if its actually a G13BA you have then only difference AFAIK is capacity. G13A = 1324 cc /SOHC 8V carby G13BA = 1298 cc / SOHC 8V carby x2. got both engines to.. Original in the drover: 
in the late 88 WT i had. 
|
|
| Author: | Mike [ Mon Oct 06, 2008 2:36 am ] |
| Post subject: | Re: which motor |
i thought that was the case so i take it the g13ba is a "newer" motor? foolspeed are you standing on your car taking that photo? 
|
|
| Author: | foolsp33d [ Mon Oct 06, 2008 2:51 am ] |
| Post subject: | Re: which motor |
Mike wrote: foolspeed are you standing on your car taking that photo? hahaha yeh, i parked at my bros today and he had to zooks of hazzard it over the bonnet.. quiet funny as the bit in the bonnet got him on the arse lol
|
|
| Author: | Mike [ Mon Oct 06, 2008 3:22 am ] |
| Post subject: | Re: which motor |
foolsp33d wrote: Mike wrote: foolspeed are you standing on your car taking that photo? hahaha yeh, i parked at my bros today and he had to zooks of hazzard it over the bonnet.. quiet funny as the bit in the bonnet got him on the arse lolhaha isn't a zook bonnet too high and too short to do that? |
|
| Author: | Brett [ Mon Oct 06, 2008 11:50 am ] |
| Post subject: | Re: which motor |
the a engine has a longer stroke, different rods, crank, pistions and have an oil feed line in the block as back in japan or where every they are made you can get stock turbo engines. both are pretty much the same to rebuild. |
|
| Author: | foolsp33d [ Mon Oct 06, 2008 11:06 pm ] |
| Post subject: | Re: which motor |
Mike wrote: foolsp33d wrote: Mike wrote: foolspeed are you standing on your car taking that photo? hahaha yeh, i parked at my bros today and he had to zooks of hazzard it over the bonnet.. quiet funny as the bit in the bonnet got him on the arse lolhaha isn't a zook bonnet too high and too short to do that? he is 6ft 3
|
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|