I though JML was building some
maybe askhim to see how far till the design is finish
| auszookers.com http://auszookers.com/forum/ |
|
| Tough Jimny CVs. http://auszookers.com/forum/viewtopic.php?f=5&t=31009 |
Page 1 of 1 |
| Author: | 31zook [ Wed Mar 07, 2012 8:15 pm ] |
| Post subject: | Tough Jimny CVs. |
I was wondering, if people are fitting 1.3WT cvs and axles to there jimny's why won't chromo's fit in the knuckle? Are there WT/NT Jimny models? Or are they all the same? Mine is a 99 G13bb I know the 26spline is different, but I was kinda thinking that I would get custom axles made up anyway to suit the 22spline air locker I already have. Im sure I've missed something really important, but I can't see why it wouldn't work... |
|
| Author: | monley [ Wed Mar 07, 2012 8:48 pm ] |
| Post subject: | Re: Tough Jimny CVs. |
There are W/T and N/T jimny's, but we never go the N/T's here. I think the jimny cv's are the size of 1 liter NT cv's from what reading i have done on the subject. Jump on bigjimny.com and ask the question there, as a lot of the guys over their run HD axle's and cv's. |
|
| Author: | Blakey [ Thu Mar 08, 2012 8:50 am ] |
| Post subject: | Re: Tough Jimny CVs. |
if you got the cash have a look at Zanfi.it expensive but made for the jimny http://www.zanfi.it/modules.php?name=ca ... ath=63_121 They also do all other models of 4x4 suzuki's |
|
| Author: | 31zook [ Thu Mar 08, 2012 11:24 am ] |
| Post subject: | Re: Tough Jimny CVs. |
Hmm, birfield rings might be enough.... 1.3Cvs and birfeild rings.... |
|
| Author: | BertZook [ Thu Mar 08, 2012 11:32 am ] |
| Post subject: | Re: Tough Jimny CVs. |
I though JML was building some maybe askhim to see how far till the design is finish
|
|
| Author: | SierraDan [ Thu Mar 08, 2012 11:34 am ] |
| Post subject: | Re: Tough Jimny CVs. |
when i was breaking standard CV's it was the inner section that would crack and the spline would just slip in it. |
|
| Author: | jonno_racing [ Thu Mar 08, 2012 1:30 pm ] |
| Post subject: | Re: Tough Jimny CVs. |
u drive a jimny Dan? |
|
| Author: | SierraDan [ Thu Mar 08, 2012 1:57 pm ] |
| Post subject: | Re: Tough Jimny CVs. |
jonno_racing wrote: u drive a jimny Dan? 31zook wrote: people are fitting 1.3WT cvs and axles to there jimny's
|
|
| Author: | BlueSuzy [ Thu Mar 08, 2012 2:42 pm ] |
| Post subject: | Re: Tough Jimny CVs. |
our jims are wt. They are a wider track than the sierra wt so the axles will have to be longer. Jims are 1L size front diff/axles/cvs. The cv's look cute.. |
|
| Author: | monley [ Thu Mar 08, 2012 3:56 pm ] |
| Post subject: | Re: Tough Jimny CVs. |
I have a long slider axle here and cv here if you need any measurents or pics.... |
|
| Author: | 31zook [ Thu Mar 08, 2012 7:56 pm ] |
| Post subject: | Re: Tough Jimny CVs. |
Ahh, thanks tim and monley. I'll make a trip up to see you tim and grab my bits from you, I think I'll start stockpiling jimny stuff.... My plan is to get tims axles and put them on some 1.3CVs I have here. If that works I'll see if they fit in the knuckle, if that works I'll try to put a birfield ring on. I drive very gently, so I'm not anticipating breaking anything.... Booyaa! |
|
| Author: | monley [ Thu Mar 08, 2012 8:12 pm ] |
| Post subject: | Re: Tough Jimny CVs. |
31zook wrote: Ahh, thanks tim and monley. I'll make a trip up to see you tim and grab my bits from you, I think I'll start stockpiling jimny stuff.... My plan is to get tims axles and put them on some 1.3CVs I have here. If that works I'll see if they fit in the knuckle, if that works I'll try to put a birfield ring on. I drive very gently, so I'm not anticipating breaking anything.... Booyaa! It will still break been a jimny  
|
|
| Author: | 31zook [ Fri Mar 09, 2012 8:43 am ] |
| Post subject: | Re: Tough Jimny CVs. |
Haha, doubt it, I'm the same as dan, drove really hard at first then softened up and now I don't break a thing. Also know where the limit is is a pretty good thing. |
|
| Author: | Blakey [ Fri Mar 09, 2012 8:53 am ] |
| Post subject: | Re: Tough Jimny CVs. |
Iv been told forester CV's and halfshafts fit with small modifacation. |
|
| Author: | BlueSuzy [ Fri Mar 09, 2012 12:05 pm ] |
| Post subject: | Re: Tough Jimny CVs. |
Well i know outback axles and cv's are puny. Had to change an inner front cv boot a while ago. Not really an upgrade. |
|
| Author: | tanshi [ Fri Mar 09, 2012 12:20 pm ] |
| Post subject: | Re: Tough Jimny CVs. |
we run sierra chromo cvs in our LJs with custom cut inners. dont see why you couldnt do it for Jimnys |
|
| Author: | SierraDan [ Fri Mar 09, 2012 1:23 pm ] |
| Post subject: | Re: Tough Jimny CVs. |
31zook wrote: I'm the same as dan, drove really hard at first then softened up and now I don't break a thing.  I still drive hard haha, I just have chromos now and the front centre is pretty much solid weld haha.
|
|
| Author: | 31zook [ Sat Mar 10, 2012 11:19 am ] |
| Post subject: | Re: Tough Jimny CVs. |
Hmm, Internet myths hey....... Will try to fit just a Sierra CV, if that works I'll go from there. I can't find any information about it anywhere, so I'll just explore around.... |
|
| Author: | jonno_racing [ Sat Mar 10, 2012 3:58 pm ] |
| Post subject: | Re: Tough Jimny CVs. |
I'm intrested to know your results |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|