auszookers.com
http://auszookers.com/forum/

Where to get new/ performance parts g16a 8 valve
http://auszookers.com/forum/viewtopic.php?f=5&t=31015		 Page 1 of 1
Author:  red diggity [ Thu Mar 08, 2012 6:09 am ]
Post subject:  Where to get new/ performance parts g16a 8 valve
Hi would like it if someone could point me in the direction of who or where i can get performance and or new internals for the g16a not so much pistons but rods, cam, valves, uprated valve springs, crank.
Any assistance would be a help. I have looked on low range off roads website found crank and pistons and new rockers but would prefer to get the stuff here in aus if i can.
Author:  JrZook [ Thu Mar 08, 2012 10:36 am ]
Post subject:  Re: Where to get new/ performance parts g16a 8 valve
What is your proposed plan/build for this engine?
Author:  want33s [ Thu Mar 08, 2012 2:19 pm ]
Post subject:  Re: Where to get new/ performance parts g16a 8 valve
There is a mob in the states that convert G13's to aero engines that make serious power.
Can't think of their name but a google should find them.
Author:  sogone [ Fri Mar 09, 2012 8:30 am ]
Post subject:  Re: Where to get new/ performance parts g16a 8 valve
http://www.raven-rotor.com/
Author:  Rhinoman [ Sat Mar 10, 2012 9:09 am ]
Post subject:  Re: Where to get new/ performance parts g16a 8 valve
Not in Aus but have a look here:

http://www.pt2w.com/srd/
Author:  Aaron [ Sat Mar 10, 2012 10:21 am ]
Post subject:  Re: Where to get new/ performance parts g16a 8 valve
mine isnt a 1.6 but i got a g13a that im reabuilding with flat top high compression pistons 20thou over size, 262 cam, rejet carby and when its done an exhaust. im hopeing for an improvement :D
Page 1 of 1 All times are UTC + 9:30 hours
Powered by phpBB® Forum Software © phpBB Group
https://www.phpbb.com/