auszookers.com
http://auszookers.com/forum/

Ball joints.....GV
http://auszookers.com/forum/viewtopic.php?f=5&t=31031		 Page 1 of 1
Author:  Built4thrashing [ Thu Mar 08, 2012 3:19 pm ]
Post subject:  Ball joints.....GV
Discovered i have a problem with the drivers side lower control arm ball joint. Its gone dry and is squeeking when the steering turns. Does anyone know if they can be pulled out and replaced? I remember years ago that it could be done but now days every thing is a throw away part.

Suzistore want $360+ per side for a new arm with ball joint :shocked: :shocked: .

2nd hand ones are something like $100-$165 each depending on what wrecker you call.

I can order 2 replacement arms for $143 on ebay from the states but they want $200 for postage.....Way cheaper than i can get locally

If i can get them replaced ill do that but if not ill buy some new ones from ebay.
Author:  christover1 [ Thu Mar 08, 2012 4:07 pm ]
Post subject:  Re: Ball joints.....GV
Mine are bolted in, maybe you could do something with.
or modify for early Vit ones?
No idea if arms would fit on a GV.
Author:  atari4x4 [ Thu Mar 08, 2012 4:26 pm ]
Post subject:  Re: Ball joints.....GV
GV Calmini arms are probably the only solution
Author:  buzbox [ Thu Mar 08, 2012 4:59 pm ]
Post subject:  Re: Ball joints.....GV
Looking at the GV Calmini control arms it looks as though they use the early model Vit's ball joints.

It probably won't hurt to see if you can buy just the control arms.

http://www.lowrangeoffroad.com/index.ph ... ystem.html

damn net connection, atari beat me to it.
Author:  laurie [ Thu Mar 08, 2012 5:01 pm ]
Post subject:  Re: Ball joints.....GV
in workshop manual

NOTE
suspension control arm and arm joint cannot be separated

if there is any damage to either parts
control arm must be replaced as a complete unit


bugger :evil:
Author:  atari4x4 [ Thu Mar 08, 2012 5:04 pm ]
Post subject:  Re: Ball joints.....GV
buzbox wrote:
amn net connection, atari beat me to it.


33 minute intardnet delay... SUX2BU :D
Author:  Built4thrashing [ Thu Mar 08, 2012 5:10 pm ]
Post subject:  Re: Ball joints.....GV
Im yet to contact Calmini about just the arms. Will do that tomorrow.....maybe.
Author:  buzbox [ Thu Mar 08, 2012 5:12 pm ]
Post subject:  Re: Ball joints.....GV
atari4x4 wrote:
buzbox wrote:
amn net connection, atari beat me to it.


33 minute intardnet delay... SUX2BU :D

got sick of refreshing so had dinner. :lol:
Author:  royce [ Thu Mar 08, 2012 7:01 pm ]
Post subject:  Re: Ball joints.....GV
Put vitara arms in?
Author:  shabz [ Thu Mar 08, 2012 7:11 pm ]
Post subject:  Re: Ball joints.....GV
royce wrote:
Put vitara arms in?


I was thinking that too. Seeing as the front diff is pretty much interchangeable, maybe the arms are too
Author:  atari4x4 [ Thu Mar 08, 2012 7:16 pm ]
Post subject:  Re: Ball joints.....GV
the only thing i can think of is the swaybars are reverse mounted on the GV's
Author:  Built4thrashing [ Fri Mar 09, 2012 10:37 am ]
Post subject:  Re: Ball joints.....GV
Getting some Vitara arms this weekend to compare the difference. Hope its just the sway bar thats different........Will see.
Page 1 of 1 All times are UTC + 9:30 hours
Powered by phpBB® Forum Software © phpBB Group
https://www.phpbb.com/