auszookers.com
http://auszookers.com/forum/

carby r&r
http://auszookers.com/forum/viewtopic.php?f=5&t=31168		 Page 1 of 1
Author:  andrewa [ Wed Mar 14, 2012 11:18 am ]
Post subject:  carby r&r
how hard is it to remove & replace carby of 92 1.3 swb sierra
to have it rebuilt.
Author:  Zook_Fan [ Wed Mar 14, 2012 11:20 am ]
Post subject:  Re: carby r&r
Remove and replace is very easy. Take a few pictures of all the wiring and hoses before you pull it off if you are unfamiliar with it but essentially it is the 4 bolts that go through the top into the manifold, the accelerator cable, a couple of hoses and away you go. Are you rebuilding it?
Author:  neofitou [ Wed Mar 14, 2012 11:22 am ]
Post subject:  Re: carby r&r
x2 very easy.
The harder part is the rebuid, taking it to someone is easy, and then attach it to the car and take it to them for a tune up.
Author:  andrewa [ Wed Mar 14, 2012 12:13 pm ]
Post subject:  Re: carby r&r
the idea is to rebuild it as it has never been done before to help with better fuel economy.
will have carby acid dipped & thoughly cleaned & rebuilt & tuned just like new. was looking at removing carby
myself to save some money.
Author:  matfan [ Thu Mar 15, 2012 10:40 am ]
Post subject:  Re: carby r&r
acid dipped??

What's wrong with carby cleaner, it made my 20 year old aisin look brand new!!
Author:  JrZook [ Thu Mar 15, 2012 10:46 am ]
Post subject:  Re: carby r&r
matfan wrote:
acid dipped??

What's wrong with carby cleaner, it made my 20 year old aisin look brand new!!


I never knew carby cleaner had etchants to etch off aluminum oxide and and make it shiny new again. What brand?
Author:  matfan [ Thu Mar 15, 2012 10:53 am ]
Post subject:  Re: carby r&r
I can't remember the brand, it was called carburettor & small parts cleaner. Milky white stuff, stings like all hell on bare skin!!
Page 1 of 1 All times are UTC + 9:30 hours
Powered by phpBB® Forum Software © phpBB Group
https://www.phpbb.com/