Thanks for the info
| auszookers.com http://auszookers.com/forum/ |
|
| Sump - difference between 1L and 1.3L http://auszookers.com/forum/viewtopic.php?f=5&t=31175 |
Page 1 of 1 |
| Author: | masterA [ Wed Mar 14, 2012 2:28 pm ] |
| Post subject: | Sump - difference between 1L and 1.3L |
Hi guys Just wondering if there is a difference between 1L sumps and 1.3L? |
|
| Author: | 2stroker [ Wed Mar 14, 2012 2:48 pm ] |
| Post subject: | Re: Sump - difference between 1L and 1.3L |
Yes, completely different |
|
| Author: | masterA [ Wed Mar 14, 2012 4:15 pm ] |
| Post subject: | Re: Sump - difference between 1L and 1.3L |
Can you please enlighten me in which way? Im assuming that the bolt holes would be different but are the pickups different also? Do they hold the same ammount of oil? I searched the forum and found that the sierra 1.3L holds 3.5L |
|
| Author: | want33s [ Wed Mar 14, 2012 4:47 pm ] |
| Post subject: | Re: Sump - difference between 1L and 1.3L |
Completely different........ meaning... Completely different. Nothing the same. Dissimilar. Not alike. |
|
| Author: | masterA [ Wed Mar 14, 2012 5:05 pm ] |
| Post subject: | Re: Sump - difference between 1L and 1.3L |
No probs....thank you |
|
| Author: | 303zuke [ Wed Mar 14, 2012 9:51 pm ] |
| Post subject: | Re: Sump - difference between 1L and 1.3L |
Sump plugs are interchangable, but that's about all there is. The cast iron 1.0lt is an "F" series engine, while the alloy 1.3 is a "G". Completely different length, width, crank, oil pump, etc. F10A takes 3.2lt of engine oil. |
|
| Author: | masterA [ Thu Mar 15, 2012 11:05 am ] |
| Post subject: | Re: Sump - difference between 1L and 1.3L |
Thanks for the info
|
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|