| auszookers.com http://auszookers.com/forum/ |
|
| what is the difference between g13a and g13ba engines http://auszookers.com/forum/viewtopic.php?f=5&t=31180 |
Page 1 of 1 |
| Author: | robbo92 [ Wed Mar 14, 2012 5:31 pm ] |
| Post subject: | what is the difference between g13a and g13ba engines |
heya i just bought a full rebuild kit off ebay to suit a g13ba engine but the kit that i got says it suits a g13a the only difference that i know of is the difference between the timing belts (width,round or square tooth) its a g13ba engine im rebuilding out of a 92 wt sierra to put into my 82 nt can anyone help me out with this |
|
| Author: | ROAR99 [ Wed Mar 14, 2012 6:06 pm ] |
| Post subject: | Re: difference between g13a and g13ba engines |
one is 134cm something other is 1298cm (g13ba) and yes timing belt ,, square vs round measure bore if its had a previous rebuild it could be 0.5 or bigger oversized ?... |
|
| Author: | robbo92 [ Wed Mar 14, 2012 6:21 pm ] |
| Post subject: | Re: what is the difference between g13a and g13ba engines |
Yeah my engine is the 13.. What ever it is I just wonderin if the rebuild kit i got will fit or not |
|
| Author: | want33s [ Wed Mar 14, 2012 6:33 pm ] |
| Post subject: | Re: what is the difference between g13a and g13ba engines |
robbo92 wrote: Yeah my engine is the 13.. What ever it is I just wonderin if the rebuild kit i got will fit or not 99% will fit. All seals and gaskets are same. Head gasket is only a tiny bit different but not enough to worry about. Timing belt is different. |
|
| Author: | robbo92 [ Wed Mar 14, 2012 6:45 pm ] |
| Post subject: | Re: what is the difference between g13a and g13ba engines |
Cheers I just wasnt sure if the head gasket would fit or not I assume all the other seals would fit |
|
| Author: | want33s [ Wed Mar 14, 2012 6:51 pm ] |
| Post subject: | Re: what is the difference between g13a and g13ba engines |
robbo92 wrote: Cheers I just wasnt sure if the head gasket would fit or not I assume all the other seals would fit I just double checked and both the G13B and G13BA have a 74.0mm bore so head gasket definitely will work. Stroke is different by 1.5mm |
|
| Author: | robbo92 [ Wed Mar 14, 2012 8:25 pm ] |
| Post subject: | Re: what is the difference between g13a and g13ba engines |
Great I just wasnt sure about the head gasket because of measurements and how its set out for the water jacket passages into the head etc |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|