| auszookers.com http://auszookers.com/forum/ |
|
| Removing speedo output. Sierra. http://auszookers.com/forum/viewtopic.php?f=5&t=31230 |
Page 1 of 1 |
| Author: | boostedbrick [ Sat Mar 17, 2012 1:00 pm ] |
| Post subject: | Removing speedo output. Sierra. |
Anyone have any tips for getting a stuck speedo output out? This thing is well stuck, I bent my vice grips trying to spin it out... |
|
| Author: | skyman [ Sat Mar 17, 2012 1:20 pm ] |
| Post subject: | Re: Removing speedo output. Sierra. |
I know it is obvious, but is the set Bolt loosened? |
|
| Author: | boostedbrick [ Sat Mar 17, 2012 1:45 pm ] |
| Post subject: | Re: Removing speedo output. Sierra. |
Yep its been removed... I have the case apart to change bearings, just cant get the last gears out. |
|
| Author: | want33s [ Sat Mar 17, 2012 2:03 pm ] |
| Post subject: | Re: Removing speedo output. Sierra. |
Vise grips locked onto it and a screwdriver through through the jaws to twist it. Once it can wiggle it should pop out. Rarely they call for a bit more effort to remove them..EG slide hammer. |
|
| Author: | Daves4wd [ Sat Mar 17, 2012 3:44 pm ] |
| Post subject: | Re: Removing speedo output. Sierra. |
I pulled mine out just then with needle nose pliers but it wasent Stuck try some crc and let it soak in then try again |
|
| Author: | boostedbrick [ Sat Mar 17, 2012 5:55 pm ] |
| Post subject: | Re: Removing speedo output. Sierra. |
Did want33s trick and got it out in the end, had been soaking in WD40 overnight... There was a fair amount of sand in there.. Definitely tighter than other cases I pulled apart. |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|