| auszookers.com http://auszookers.com/forum/ |
|
| Broken camber bolt http://auszookers.com/forum/viewtopic.php?f=5&t=31251 |
Page 1 of 1 |
| Author: | got_bar_work [ Sun Mar 18, 2012 5:20 pm ] |
| Post subject: | Broken camber bolt |
I was working on my vit today and notice that my lhs camber bolt had broken in half Has any one seen this before Does any one know what the size of the camber bolt is I need to replace |
|
| Author: | vitzookman [ Sun Mar 18, 2012 6:21 pm ] |
| Post subject: | Re: Broken camber bolt |
I have never seen that before but I don't get out much lol... I think it's 12mm from what they say on EBay |
|
| Author: | DarkHorse [ Sun Mar 18, 2012 10:17 pm ] |
| Post subject: | Re: Broken camber bolt |
I've got a pair here if you need them, they're slightly too long and come with spacers to compensate, but they'll do the job. PM me. Otherwise Pedders will charge you something like $80 for a new pair. |
|
| Author: | fordem [ Mon Mar 19, 2012 1:14 am ] |
| Post subject: | Re: Broken camber bolt |
12mm camber bolts - you can get them from Amazon in the US (Engalls Engineering) for about $20/pair (plus shipping) |
|
| Author: | Built4thrashing [ Mon Mar 19, 2012 4:00 pm ] |
| Post subject: | Re: Broken camber bolt |
I broke on on my GV. Had it replaced undr warranty. was only 3 months old. |
|
| Author: | got_bar_work [ Tue Mar 20, 2012 4:42 pm ] |
| Post subject: | Re: Broken camber bolt |
I got a new one from a suspension joint today but it kind of worries me now that I know they can snap If all of it came out while driving it could be dangerous Any one tried just sloting the strut then welding a thick washer on the sides to fix the camber for good That way u could use normal ht bolt and not have to stuff round adjusting amber every few months |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|