undo nut, remove the flange swap the seal, do the nut up in the exact same place it was before
really you should remove the pinion and fit a new crush sleeve and bearings but its not an easy job and costs a lot so that way is almost as good
| auszookers.com http://auszookers.com/forum/ |
|
| rear diff pinion seal http://auszookers.com/forum/viewtopic.php?f=5&t=3128 |
Page 1 of 1 |
| Author: | ZookiDave [ Fri Oct 10, 2008 1:49 am ] |
| Post subject: | rear diff pinion seal |
hey, would like to no if any1 can give me some helpful hints 4 changing the pinion seal in sierra rear diff Cheers |
|
| Author: | royce [ Fri Oct 10, 2008 2:03 am ] |
| Post subject: | Re: rear diff pinion seal |
undo nut, remove the flange swap the seal, do the nut up in the exact same place it was before really you should remove the pinion and fit a new crush sleeve and bearings but its not an easy job and costs a lot so that way is almost as good
|
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|