Put the 1l dizzy in the 1.3 and the 1l alt on. Hey presto, no wiring changes!
| auszookers.com http://auszookers.com/forum/ |
|
| Wiring for coil 1.3 into 1.0 http://auszookers.com/forum/viewtopic.php?f=5&t=31400 |
Page 1 of 1 |
| Author: | holdenrules [ Sat Mar 24, 2012 9:21 am ] |
| Post subject: | Wiring for coil 1.3 into 1.0 |
Chasing some help. Currently just put a 1.3 in too my 1.0 and I'm up to wiring for the coil and alternator. As one is points and ones electronic coil can any one tell me what wires go where for the coil. Also the alternator wiring is different. Could any one help me out please. Regards |
|
| Author: | holdenrules [ Sat Mar 24, 2012 10:46 am ] |
| Post subject: | Re: Wiring for coil 1.3 into 1.0 |
Any help asap would be great |
|
| Author: | sideways [ Sat Mar 24, 2012 12:57 pm ] |
| Post subject: | Re: Wiring for coil 1.3 into 1.0 |
Put the 1l dizzy in the 1.3 and the 1l alt on. Hey presto, no wiring changes!
|
|
| Author: | royce [ Sat Mar 24, 2012 2:25 pm ] |
| Post subject: | Re: Wiring for coil 1.3 into 1.0 |
Black and white wire on the ballast resistor goes to coil positive, dont use the ballast but do use a 1.3 coil brown wire from teh dizzy also to coil positive, the other from the dizzy (maybe yellow) to coil negative Alt is a pain in the ass to explain but Fat wire, to teh stud on the alternator like usual Get the 1.3 alt plug and plug it in, you have black and white wire and white and red from memory? black and white on the plug hook to black and white on teh 1 litre loom white and red on plug hook to white and GREEN on the 1 litre loom Now under the glovebox is the alt regulator, 6 pin plug into a black box, remove the box and chuck it, cut the white and GREEN wire and white and RED wire from teh plug and join them together on the CAR SIDE of the loom Should all work then |
|
| Author: | holdenrules [ Sat Mar 24, 2012 2:40 pm ] |
| Post subject: | Re: Wiring for coil 1.3 into 1.0 |
Cheers people worked it all out. Thanks for your help
|
|
| Author: | slowsierra [ Sun Nov 04, 2012 2:32 pm ] |
| Post subject: | Re: Wiring for coil 1.3 into 1.0 |
hi guys i found this topic after a search and thought it was close to what i am after. i have wired it up as royce explained but it still doesn't work. (my sierra is a 1.3L NT LWB with the standard 1.3L engine). i brought a 1.3L LWB sierra but it was in bits i have just got the 1.3L motor in and plugged up but i don't have any spark coming from the coil to the dizzy. i have tried a spare coil, checked for loose earths. not sure where to go from here. another thing is if the cable from the alt to the battery is disconnected it won't turn over is this normal? any ideas??????? thanks greg |
|
| Author: | slowsierra [ Sun Nov 04, 2012 7:24 pm ] |
| Post subject: | Re: Wiring for coil 1.3 into 1.0 |
another thing i don't have is the alt regulator box or a plug for it is this normal. i remember my old SWB sierra had one and it was also 1.3L? thanks greg |
|
| Author: | outwestfreddy [ Tue May 13, 2014 5:23 pm ] |
| Post subject: | Re: Wiring for coil 1.3 into 1.0 |
can i use a 1lt alternater and the 1.3lt coil? |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|