Try using a 1.6 vit starter
| auszookers.com http://auszookers.com/forum/ |
|
| Starter motor meshing 1.6 efi http://auszookers.com/forum/viewtopic.php?f=5&t=32177 |
Page 1 of 1 |
| Author: | Coastline [ Sat Apr 28, 2012 6:25 pm ] |
| Post subject: | Starter motor meshing 1.6 efi |
Ok so I just got myself a new Sierra but having problems with the starter. The car has a 1.6 vitara efi with Sierra gearbox, bens adapter. When you try to start the car it makes the worst meshing noise. So had the starter rebuilt and still the same, so did a search and found out the starter is out of a grand vitara 2.0L. I tried a Sierra 1.3L starter and did the same noise. Any help would be great. |
|
| Author: | Rusho [ Sat Apr 28, 2012 7:32 pm ] |
| Post subject: | Re: Starter motor meshing 1.6 efi |
Try using a 1.6 vit starter
|
|
| Author: | want33s [ Sat Apr 28, 2012 7:34 pm ] |
| Post subject: | Re: Starter motor meshing 1.6 efi |
If 2 starters do the same thing I'd pull the inspection plate from the lower bellhousing and check the ring gear teeth on the flywheel. A 1.3 starter needs grinding to fit properly with a 1.6/Sierra box. |
|
| Author: | Coastline [ Sat Apr 28, 2012 8:16 pm ] |
| Post subject: | Re: Starter motor meshing 1.6 efi |
I had I look at the ring gear and it has little wear but it doesn't look to bad, I am going to order a new 1.6 vitara starter and see how that goes. If that doesnt work I will have to find a new Flywheel or ring gear, not looking forward to pulling the gearbox out. Is a 1.6 vitara starter different to a 2.0L starter. |
|
| Author: | Coastline [ Fri May 04, 2012 7:07 pm ] |
| Post subject: | Re: Starter motor meshing 1.6 efi |
Ok so I got a new vitara starter and it's still not starting When you turn the key the central locking clicks and the stater sounds like its still meshing. Could it be a power thing. |
|
| Author: | joel [ Fri May 04, 2012 7:09 pm ] |
| Post subject: | Re: Starter motor meshing 1.6 efi |
bad earth or you need the clicky starter fix? can you roll start it? |
|
| Author: | Coastline [ Fri May 04, 2012 7:19 pm ] |
| Post subject: | Re: Starter motor meshing 1.6 efi |
Yer it roll starts but I can't always park on a hill |
|
| Author: | steve [ Fri May 04, 2012 8:10 pm ] |
| Post subject: | Re: Starter motor meshing 1.6 efi |
I had the same issue with a 1.6, sounded like some kind of turbo starter, could never work out why it sounded like that but was never a problem. I know of someone else that had the same issue, but they didn't worry about it either. |
|
| Author: | Coastline [ Fri May 04, 2012 8:38 pm ] |
| Post subject: | Re: Starter motor meshing 1.6 efi |
The sound is really bad like the starter is meshing big time with the flywheel, the flywheel has small amount of wear but it's not to bad. What else could it be |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|