Tigerz are cheap.. and good quality from what I hear
| auszookers.com http://auszookers.com/forum/ |
|
| Buying a winch .. need advice. http://auszookers.com/forum/viewtopic.php?f=5&t=32271 |
Page 1 of 1 |
| Author: | thesupervisor [ Wed May 02, 2012 12:48 am ] |
| Post subject: | Buying a winch .. need advice. |
im starting to look for a winch for my gv as i will start building winch bars soon how does this one look to you ? http://www.ebay.com.au/itm/ORU-9000LB-E ... 19cd35c41c any advice what to look out for? thanks |
|
| Author: | whincup [ Wed May 02, 2012 10:58 am ] |
| Post subject: | Re: Buying a winch .. need advice. |
when it comes to winches, buy a well known brand. because the only time your going to actually use a winch, your most likely going to be stuck and alone, and if the winch happens to shit itself your screwed... |
|
| Author: | BlueSuzy [ Wed May 02, 2012 11:04 am ] |
| Post subject: | Re: Buying a winch .. need advice. |
If your stuck and alone, prepare to be called an Idiot. That style is good, Its just your average chinese winch with rope, Probably can be found cheaper with hunting. My Aldi winch has the same outer housing, different brand. (there is going to be a lot of brands with exact same winch) A lot of people recommend to clean out the original grease and put some good stuff in there.. Which i did. |
|
| Author: | fire60 [ Wed May 02, 2012 11:35 am ] |
| Post subject: | Re: Buying a winch .. need advice. |
I recently had my warn 8000 shit itself. Replaced it with a Runva 9500. It had a good work out over Easter and seemed to come through with flying colours. They retail at $850.00 over here. |
|
| Author: | ZookFan [ Wed May 02, 2012 5:26 pm ] |
| Post subject: | Re: Buying a winch .. need advice. |
Tigerz are cheap.. and good quality from what I hear
|
|
| Author: | atari4x4 [ Wed May 02, 2012 5:28 pm ] |
| Post subject: | Re: Buying a winch .. need advice. |
ZookFan wrote: Tigerz are cheap.. and good quality from what I hear then why did you buy a Runva? |
|
| Author: | thesupervisor [ Wed May 02, 2012 8:49 pm ] |
| Post subject: | Re: Buying a winch .. need advice. |
i think this is the one for me 29kg pity its 13000lb dont really need it that big http://www.ebay.com.au/itm/ELECTRIC-WIN ... 2a1c9cfdb0 |
|
| Author: | ZookFan [ Thu May 03, 2012 8:22 am ] |
| Post subject: | Re: Buying a winch .. need advice. |
Because of this.. http://www.eon4wd.com.au/documents/runv ... banner.jpg And good price $850 for a 9500 pound winch.. but did not fit 
|
|
| Author: | SierraDan [ Thu May 03, 2012 1:33 pm ] |
| Post subject: | Re: Buying a winch .. need advice. |
The winch you bought doesn't fit? |
|
| Author: | ZookFan [ Thu May 03, 2012 2:45 pm ] |
| Post subject: | Re: Buying a winch .. need advice. |
Yes... |
|
| Author: | JrZook [ Thu May 03, 2012 2:49 pm ] |
| Post subject: | Re: Buying a winch .. need advice. |
Fail.. |
|
| Author: | ZookFan [ Thu May 03, 2012 2:51 pm ] |
| Post subject: | Re: Buying a winch .. need advice. |
Yep 
|
|
| Author: | stockman [ Thu May 03, 2012 2:51 pm ] |
| Post subject: | Re: Buying a winch .. need advice. |
Too wide? |
|
| Author: | skyman [ Fri May 04, 2012 6:33 am ] |
| Post subject: | Re: Buying a winch .. need advice. |
This may help, you can narrow most winches that are the horizontal style. As long as you or a friend can weld you should be ok. Of course you do not need t o make it THIS narrow lol.. just short enough to fit.  http://www.zukikrawlers.com/showthread. ... nch+narrow |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|
