| auszookers.com http://auszookers.com/forum/ |
|
| G13BA into Suzuki Sierra NT http://auszookers.com/forum/viewtopic.php?f=5&t=32288 |
Page 1 of 1 |
| Author: | suzukisport [ Wed May 02, 2012 6:02 pm ] |
| Post subject: | G13BA into Suzuki Sierra NT |
Hi guys, Just have a quick question. I'm selling my old G13BA out of my coily Sierra. A person interested in it wants to know if it would fit into his SJ413/ NT Sierra that had a G13A in it which cracked its head? Help would be appreciated. Thanks Thor |
|
| Author: | want33s [ Wed May 02, 2012 6:11 pm ] |
| Post subject: | Re: G13BA into Suzuki Sierra NT |
Yep it will bolt straight in. Carby wiring is a bit different. Clutch and flywheel 'may' be different but are all easily swapped over. |
|
| Author: | suzukisport [ Wed May 02, 2012 6:16 pm ] |
| Post subject: | Re: G13BA into Suzuki Sierra NT |
Thanks for that |
|
| Author: | SuziBlu [ Wed May 02, 2012 6:25 pm ] |
| Post subject: | Re: G13BA into Suzuki Sierra NT |
I thought they were one and the same except for a slight CC diff ? |
|
| Author: | want33s [ Thu May 03, 2012 8:09 am ] |
| Post subject: | Re: G13BA into Suzuki Sierra NT |
SuziBlu wrote: I thought they were one and the same except for a slight CC diff ? Yeah pretty much. NT 1.3's have a single wire to the carby. WT's have 3 wires. Some NT's use a stepped flywheel and less splines on the clutch whereas WT run a flat flywheel so there are two different clutch kits. There is 26cc difference thanks to a stroke change. |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|