| auszookers.com http://auszookers.com/forum/ |
|
| yj conversion http://auszookers.com/forum/viewtopic.php?f=5&t=32449 |
Page 1 of 1 |
| Author: | KEENSY85 [ Wed May 09, 2012 1:07 am ] |
| Post subject: | yj conversion |
Hey peeps I'm new to the forum,but iv constantly looked over topics over time that have been posted here. so to get the point does anyone know of any one who had done a yj conversion to there suzi, iv lined up an engineer he seems very confident I can get it passed all legit especially as of the first of July when the legislation in qld is set to be finally relaxed we might even be allowed spoa wich would rock but I realy would like the budget flex of the yj conversion, I'm more than happy to extend the chassis and move mounts around to achieve the goal so does anyone know anyone who's done it ? |
|
| Author: | alien [ Wed May 09, 2012 8:27 am ] |
| Post subject: | Re: yj conversion |
mines done on hilux front leaves, pretty much the same conversion: viewtopic.php?f=4&t=22354&hilit=ufo |
|
| Author: | KEENSY85 [ Wed May 09, 2012 12:13 pm ] |
| Post subject: | Re: yj conversion |
Also whats ur location im in bris |
|
| Author: | alien [ Wed May 09, 2012 4:03 pm ] |
| Post subject: | Re: yj conversion |
theyre hilux front leaf springs - you can't buy brand new standard height leaves anymore, mine are 2" lifted ones but only running the top 2 leaves so its sagged nice and flat. total height when i first did it was 190mm over stock, however its dropped a fair bit since then (with the leaves flattening out). |
|
| Author: | KEENSY85 [ Wed May 09, 2012 4:57 pm ] |
| Post subject: | Re: yj conversion |
Thanks mate |
|
| Author: | SierraDan [ Wed May 09, 2012 5:43 pm ] |
| Post subject: | Re: yj conversion |
Feroza springs are good too. |
|
| Author: | KEENSY85 [ Sat May 12, 2012 12:58 am ] |
| Post subject: | Re: yj conversion |
pretty sure im going with yj springs iv got a lot of brakets and measurments worked out and drawn up,but my engineer is giving me advice to wait till the 1st of june for changes in the codes it seems as if we may get away with more in qld as the want to unifor the codes aus wide wich means major relax in qld about f time i say ,any tips or advice i would apreciate i will post some paper drawings of design asap posible for scrutanising(wich is good) |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|