auszookers.com
http://auszookers.com/forum/

Jimny auto on g13a
http://auszookers.com/forum/viewtopic.php?f=5&t=32516		 Page 1 of 1
Author:  jmd-247 [ Fri May 11, 2012 2:22 pm ]
Post subject:  Jimny auto on g13a
Is the bell housing pattern the same from the jimny g13bb to the g13a??
Without having a look I wouldn't have a clue an all you more Suzuki educated people might no!
I would expect them tO be tho?

I want to put in an auto box in the Sierra but quite happy being a slow poke with the smaller engine.

Any help appreciated

Josh
Author:  tanshi [ Fri May 11, 2012 2:32 pm ]
Post subject:  Re: Jimny auto on g13a
yep its the same bell housing

its an electronic auto, thus none of the inputs in needs will be available from a carbie 1.3

you would be better off getting the jimny 1.3 and doing efi at the same time
Author:  Fatzook [ Fri May 11, 2012 2:36 pm ]
Post subject:  Re: Jimny auto on g13a
tanshi wrote:
yep its the same bell housing

its an electronic auto, thus none of the inputs in needs will be available from a carbie 1.3

you would be better off getting the jimny 1.3 and doing efi at the same time



X2.
Author:  jmd-247 [ Fri May 11, 2012 3:54 pm ]
Post subject:  Re: Jimny auto on g13a
Spewing! Thanks guys I thought that would be the case somehow!
Author:  JrZook [ Fri May 11, 2012 3:56 pm ]
Post subject:  Re: Jimny auto on g13a
Hurmmmmm interesting
Author:  Gwagensteve [ Fri May 11, 2012 5:18 pm ]
Post subject:  Re: Jimny auto on g13a
Fatzook wrote:
tanshi wrote:
yep its the same bell housing

its an electronic auto, thus none of the inputs in needs will be available from a carbie 1.3

you would be better off getting the jimny 1.3 and doing efi at the same time



X2.


X3.

Much easier than trying to make the auto work with the carby.

Steve.
Author:  KEENSY85 [ Sat May 12, 2012 8:20 am ]
Post subject:  Re: Jimny auto on g13a
Or just go with the 5 speed it will fit and u could use a manual pedal assembly providing there still cable not hydolic on the g13bb
Author:  SierraDan [ Sat May 12, 2012 8:28 am ]
Post subject:  Re: Jimny auto on g13a
He wants the auto.
Author:  KEENSY85 [ Sat May 12, 2012 8:36 am ]
Post subject:  Re: Jimny auto on g13a
No shit just thinking about options,I know Sierra auto are rare as, jimny manual would be cheaper ae no engine swap
Author:  SierraDan [ Sat May 12, 2012 8:39 am ]
Post subject:  Re: Jimny auto on g13a
But he wants the auto.
Author:  Gwagensteve [ Sat May 12, 2012 8:42 am ]
Post subject:  Re: Jimny auto on g13a
KEENSY85 wrote:
I know Sierra auto are rare as


G13BB Jimny autos are rare as. Sierra autos don't exist. The only Sierra autos were f6/K6 engined 660cc japanese market cars. They are a three speed and would, I think, be terrible.

Steve.
Author:  gregc [ Sat May 12, 2012 8:51 am ]
Post subject:  Re: Jimny auto on g13a
Jmd - if you already have the auto and decide not to use it, i'm happy to take it off your hands :)

If you are set on keeping your carb 1.3 then you might want to check out a vitara 3 speed install (with or without the 1.6L carb engine swap), or step up to a 1.6L EFI with the 3 or 4 speed vitara autos.
Author:  sogone [ Sat May 12, 2012 9:38 am ]
Post subject:  Re: Jimny auto on g13a
There's a lucky 13 adapter kit in the for
Sale section so you can achieve this.
Author:  zooky08 [ Sat May 12, 2012 10:46 am ]
Post subject:  Re: Jimny auto on g13a
KEENSY85 wrote:
Or just go with the 5 speed it will fit and u could use a manual pedal assembly providing there still cable not hydolic on the g13bb

why would he want to put in a jimny manual gearbox in his car, when he already has a manual gearbox to start with, he wants a auto :roll: unless the jimny manual is stronger then sierra gearbox then theres no point at all.
Author:  jmd-247 [ Mon May 14, 2012 11:23 am ]
Post subject:  Re: Jimny auto on g13a
gregc wrote:
Jmd - if you already have the auto and decide not to use it, i'm happy to take it off your hands :)

If you are set on keeping your carb 1.3 then you might want to check out a vitara 3 speed install (with or without the 1.6L carb engine swap), or step up to a 1.6L EFI with the 3 or 4 speed vitara autos.




There was one being wrecked out not far from me and if it was going to work (which i didnt think it would) i was going to use it.
unfortunately its gone now, otherwise i could have helped you out with it.

Ive now decided to go the 16b swap with a 3 speed auto.

i have no problems doing the injection swap would just rather stick with carby for some reason! 8-O

Thanks for the info guys!

josh
Author:  Fatzook [ Mon May 14, 2012 11:43 am ]
Post subject:  Re: Jimny auto on g13a
Gwagensteve wrote:
Sierra autos don't exist.



Sorry mate, but I disagree.


Autos were available as an option here, and off the shelf in japan.

I fitted an import coily motor and auto to this bad boy.

Image
Image
Image
Author:  Gwagensteve [ Mon May 14, 2012 12:15 pm ]
Post subject:  Re: Jimny auto on g13a
I can't comment on an import coiler - it wouldn't surprise me if they were available as an option in Japan with a G13, but I have never heard of or seen an auto Australian delivered sierra. I also bought all the Australian 4WD mags right through the period the Sierra was on sale and never once saw one referred to on a price list, reviewed or mentioned. I have seen some weird stuff reviewed too, like a WT high roof in overlander magazine in late 1988.

Has any one else seen or heard of a factory sierra auto?

Does anyone have any more information about this?

Steve.
Author:  Fatzook [ Mon May 14, 2012 12:25 pm ]
Post subject:  Re: Jimny auto on g13a
I've seen 3 in total. One was the front cut import, one was an aussie delivered factory SJ80 auto, and one was a WT sierra.

I guess that it is possible that the WT was an import jimny, but it was not badged as such.

Also the import coiler auto was a 3sp.
Page 1 of 1 All times are UTC + 9:30 hours
Powered by phpBB® Forum Software © phpBB Group
https://www.phpbb.com/